It appears that your browser has JavaScript disabled:
To provide the best experience on our website, we require your browser to have JavaScript enabled.
Here are the instructions for how to enable JavaScript in your web browser.
Once you've enabled Javascript, please refresh this page.

Or give us a call at 407-834-2200, and we would be happy to take your order by phone.

Back to Details

Questions for: Waterway Executive 56 Spa Pump - 2-1/2" x 2" - 4 HP, 230V, Dual Speed 372162113

Got a Question?

? Asked on 5/11/2016by Jf

Hello, Can I run this pump on a 120v circuit? Thanks jf
Reply

A Answered on 5/11/2016 by InyoPools Product Specialist Alan M.

Hello, This pump is wired only for a 230v connection.
Reply

? Asked on 5/30/2017by Phillip Cogswell

i need to replace a pump and motor, which one do i need. old item: part # 8 -187563-02 (RPM3450/1725
Reply

A Answered on 5/30/2017 by InyoPools Product Specialist Hector F.

Based on that model number the replacement motor would be part number B235. Now if you need the complete pump then we would need the specific model number or name of the front pump housing that the motor bolts to, You can provide that information or images of it if you are not sure through our support request page if you need further assistance.
Reply

? Asked on 10/21/2017by Inyo Visitor

What is the amp rating for this motor? Will this replace my 2 speed/230v Intertech motor and pump on my Jacuzzi spa? The Intertech amp rating is 12/4.4 amps. What's the difference between a 48 frame and a 56?
Reply

A Answered on 10/23/2017 by InyoPools Product Specialist Lennox H.

Hi. The amp rating of this pump is 12.0/4.4 at 230 volts. The difference between a 48Y and 56Y frame is the diameter of the motor body. The 56Y motor is larger than a 48Y frame motor. This pump can be used depending on the Intertech Pump model and configuration.
Reply

? Asked on 4/13/2020by Michael Boehm

I need to replace my spa pump and motor. My old part is a century lasar pool/ spa cat BN62 part number 7-184821-04 frame y48y. What model do I need?

Waterway Executive 56 Spa Pump - 2-1/2" x 2" - 4 HP, 230V, Dual Speed - 372162113

A Answered on 11/23/2020 by InyoPools Product Specialist Megan C.

The Century 3.0 HP Thru-Bolt 48Y Dual Speed Low Amps Motor - BN62 is available for order. To suggest a whole pump, we will need to see images of the spa pump wet-end or provide the model name or number off of it.
Reply

? Asked on 4/24/2020by dave

Do ya have a pump with discharge comes out the side instead of top
Reply

A Answered on 4/24/2020 by InyoPools Product Specialist Patrick P.

Hi Dave, The discharge on this pump can be rotated so it goes out the side. Could you email us a few photos of your pump? As this could help us reccomend the proper replacement. To supply the photos simply click the reply link below to upload your photos.
Reply

? Asked on 5/6/2020by Danny

Looking for a pump model#6500-263. If you need more info please text me back, thank you.

A Answered on 12/11/2020 by InyoPools Product Specialist Eric J.

Hello Danny, based on this information the AquaFlo Gecko Alliance XP2e Spa Pump 5HP/4OP.HP 230V, 2SPD, - 34-402-5254 is the replacement pump
Reply

? Asked on 5/14/2020by dave

do this pump come in a 4.5 or 5 HP?
Reply

A Answered on 5/14/2020 by InyoPools Product Specialist Patrick P.

Hi Dave, Yes we do carry this pump in a 5 HP version which you may view or purchase here 5 HP Waterway Spa Pump we do have the 5 HP in stock ready to ship!
Reply

? Asked on 5/15/2020by BW

I am trying to replace this pump. WaterWay Executive 56 This pump was installed in 2011. See picture. The model number does not match up exactly to the one on the website.

A Answered on 5/15/2020 by InyoPools Product Specialist Patrick P.

Hi BW, Thanks for your photos! For your Waterway PF-40-2N22C pump you will require this Waterway 3721621-1D Pump
Reply

Back to Details Got a Question?