where exactly does this o ring go? want to make sure I am not ordering the wrong one.
Reply
This O-ring goes between the collar and the salt cell on the Nature 2 Fusion Soft and goes between the collar and tablet feeder on the Nature 2 Fusion.
Reply
Is this ring flat on the top and bottom or round?
Reply
Hello Jim, Looking at the dimension picture of this o-ring, the bottom is flat and the top has an inside/outside rounded edge with a groove in the center.
Reply
Can this o-ring be used for the nature2 fusion inground for the large opening where you put the chorine tabs.
Reply
Hi Pat, Yes this is the large o-ring that goes between the collar and chlorine tablet feeder on the Nature2 Fusion.
Reply
I see in your answer to 4/18/2016 by Jim on 4/18/2016 that you are describing the O-Ring as flat and the top has an inside/outside rounded edge with a groove in the center. Or as Zodiac describes it as an o-ring with a male and female side. I ordered this product and received a standard smooth o-ring with a round cross section. It does not match your description or the cross section diagram on the paper that it came with. Is this a new design or a substitution?
Reply
Yes, the new style of that o-ring is going to look like a regular o-ring. Zodiac no longer makes it to fit flat in the groove.
Reply
Will this work for the nature 2 vision pro above ground chlorinator? The parts look exactly the same it’s just this one is for the in ground, are the o rings interchangeable?
Reply
Hi Jenn, Yes this o-ring does also work on the nature 2 vision pro above ground chlorinator
Reply
I am looking for an O ring for the filler cap of the chlorine holder for a FUSION Serial Number E16NB0633
its the larger one where you place the Chlorine tablets. Can you help please
Thanks
Phil
Reply
Hi Philip, this is the large o ring on the fusion lid where the chlorine tablets would go.
Reply
