I have a Hayward Super II 1.5HP pump that needs to be replaced. Can I upgrade to a 2 HP Hayward II single speed motor? Also, on your pricing, does this include the pump and motor?
Reply
Dan - We would not recommend upgrading to a 2HP pump unless you need additional water flow. Items that may require more flow would be water features, spa jets, and solar panels. The 2HP pump will cost more to operate. However, if you need more flow you can upgrade to the 2HP. Your filter would need to have a high enough flow rate to handle the increase in GPM. The price includes the pump and motor.
Reply
my pump has 2.4 " in and out going pipe (OD) AND IN YOUR PUMP SHOWES 2"
IS IT (OD) OR( ID)?
Reply
Hi Parviz, if you measure the outside diameter of 2" schedule 40 pipe it measures 2.375" so you would have 2" pipe on your pool and this pump would work fine.
Reply
Hayward super 2 pump 2 hp how many gpm
Reply
Hi Rob, You will have to calculate the Total Feet of Head of your pool using Step 7 of our How to Size a Pool Pump for Your In-Ground Pool and then use the chart under "Product Description" figure out the GPM based on the feet of head.
Reply
Hello. I have a Hayward SP3015X20AZ pool pump. The motor broke down & I need to replace it. I can't read the motor info because it's faded. What size motor would you recommend? How much does it cost?
Thank you
Reply
Hello Judy, From the model information you provided, you have a 2 HP motor. The correct replacement motor would be the A.O. Smith 2 H.P Round Flange Up Rate Replacement Motor. I would also strongly recommend replacing the seals and gaskets. You would need the Tune Up Kit Hayward Super II. Please click on the provided links for current pricing information. Thank you!
Reply
Hello I would like to replace the water feature single speed motor on my SP3015X20AZ to a 2 speed motor to save on electric, what is the replacement model number to replace only the motor.
Thank you!
Rich
Reply
Hello Rich, From the model number you provided, it shows you have a Hayward Super 2 Pump. According to the Hayward Super 2 Parts List, you can replace your 2HP single speed motor with the A.O. Smith 2 H.P Round Flange Dual Speed Full Rate Motor (B979). If your HP on the motor is different, you can reference the parts list for the applicable equivalent dual speed motor. I would also strongly recommend replacing the seals and gaskets (Tune Up Kit Hayward Super II) when changing out the motor. Please click on the provided links for current pricing information. Have a great day!!
Reply
$499.99 for SP3015X20AZ what coms with it ? and need to know how to change it
Reply
Moe- The Hayward Super 2 Pump 2HP Single Speed SP3015X20AZ is the entire pump as pictured on the product page, it does not come with unions. Here is a link to our site on how to replace a pool pump.
Reply
Please , is this pump good for 50HZ?. I can't find brochures with that confirmation however is offered like that
Reply
Hello Alvaro- This pump is not good for 50hz. The Super II that you would need is Hayward Super II Pump 2HP 220V 50HZ - SP3015X2051.
Reply
I have a concrete tiled Jacuzzi with 5 jets with a Hayward 2hp single speed is this big enough
Reply
Hi. Several factors will determine what size pump is used to operate a spa. The Feet of Head and features like a blower, waterfall or spill-over and the style jet. You can use our Size a Spa Pump guide for more info.
Reply
Can I substitute the SP3015 pump/ motor with the Hayward Tristar Model SP3205 EE.
I have about 10 feet of head, 2" piping
Reply
My Hayward SP3015X20AZ is leaking (again). How would I begin troubleshooting where the leak is coming from or what part probably needs replacing?
Reply
The most common leaks would come from the shaft seal or the housing gasket. We would recommend starting with replacing all the seals that are included with the GOKIT2 tune-up kit.
Reply
