I have a 2 HP pump and interested in impeller part # 64725427100. Your website shows part is for a 1 1/2 HP pump. Will this part work on 2 HP pump?
Reply
If your motor is a 2HP you'll need a 2HP impeller otherwise your motor will be using a lot of extra energy because your impeller won't be pulling the amount of water it's supposed to be pulling. Let me know what model your pump is, not the motor, and I can help you figure out which impeller you'll need.
Reply
Same as the last question, I also have a 2HP motor and need a new impeller. Would the 1.5 Hp work?
Thank you
Reply
Hi, Alex. You can use a 1.5 HP Impeller as long as it's compatible with your model pump. However, you will have a reduction in water flow.
Reply
what is the size of the shaft in & out for item # nep 2141 and how exact are the other measurements
Reply
The outer diameter of the impeller shaft is approximately 7/8" and the inner diameter is approximately 5/8#. The measurements on the site are approximate. If you can provide your pump model, we can confirm if this is the correct impeller.
Reply
I will be replacing the impeller on a PureFlow PL1601 and I am not sure how it comes off of the shaft. It is a 1.5 HP motor if that makes any difference.
Reply
Hi Keith, these impellers thread off of the motor shaft. Here is a guide that we put together called "How To Remove Stubborn Pool Pump Impellers" that may also assist.
Reply
Pool Pump Impeller 1.5 HP (AC81507) - NEP2141 will this part number work in a harris 1.5HP inground pool pump?
Reply
Hi Coy, Yes this impeller will work on the harris 1.5HP inground pool pump.
Reply
Hello, I have a pool pump with the following model number 75038, do not know the make and unsure of hp. Will this impeller fit?
Thanks
David
Reply
Hi David, this Pool Pump Impeller NEP2141 was commonly used on the 75038 pumps. We recommend replacing the motor shaft seal when servicing your pump - we made this video to help you install the shaft seal correctly.
Reply
