Does the Digital Nano DN1 include the manifold assembly consisting of strainer, tri-sensor, chlorine cell and check valve? Should the power supply cycle on & off with the pump cycling?
Reply
Hello Bob - The DN1 does include the manifold assembly with the strainer, tri-sensor, chlorine cell, and check valve. The power supply should cycle on and off with the pump.
Reply
Does the digital nano plus DNP1 have freeze protect and a built in timer.
Reply
Hi, The DNP1 is not equipped with freeze protection or a built in timer, the Pool Pilot Total Control System does.
Reply
Does the AutoPilot Digital Nano Salt Chlorine Generator 115V - DN1 include everything needed except the salt? Is the power supply included?
Reply
Yes, that is the complete system except for the salt.
Reply
Returned home from vacation and tested pool. No chlorine in pool. Pump just replaced, new filter, checked cell and it looks clean, added salt. Nano reading 100%. I put It on boost for 24 hours. Test strip showing chlorine climbing. I will take sample to pool shop for testing tomorrow. Have it forgot anything???
Reply
Hello Joe, everything seems to be checked off, but I would see what the pool shop tests, it seems like either your system just needed to be recalibrated or shut off unexpectedly.
Reply
Can the AutoPilot Nano be set to come on and off with the pump. I have two circuits on a timer, one for the pump and the other circuit for the heater and nano. I just wonder if it will lose set information if the power is shut off.
Reply
You will not lose the information as it is stored in memory. And you can set this up to come on and off with the pump
Reply
