What is the thread diameter for the insert of this anchor? I am looking for something slightly less than 0.5" (anchor is less than 3/4") - one of the anchors was lost during pool opening and I just noticed it...
Reply
The large majority of safety covers use the same brass anchor which is this anchor. If you used a 3/4" Masonry drill bit when you installed the cover this would be the anchor you would need.
Reply
Can I purchase just the screw in part and not the bottom part that anchors into the concrete?
Reply
Hello,Please view Pool Safety Cover Parts and Accessories http://www.inyopools.com/ProductListing/covers_safety_parts.aspx for the accessories offered.
Reply
I am also looking for the screw portion only. Is this still not an option? If not, do you have any suggestions of other places to look for just that part? Who is the manufacturer? Thank you.
Reply
how do I get the pool cover open (special tool ) with those brass anchor's?I work for a mosquito vector control company,and need to inspect the water.
Reply
You would loosen the straps on the safety cover.
Reply
What kind lube should you use on these brass threads before you try to remove them during cover installation? Mine are older and may be corroded. Should anti-seize be used on the threads before installing also.
Reply
Some customer's find PB Blaster to be helpful
Reply
how do you install these? just drill a hole and insert or is there more to it
Reply
Hi David, here is an installation video for installing a safety cover that may assist.
Reply
My anchor screw is 1-1/4 inches long. The outer diameter of the screw head is 5/8 inches. The outer diameter of the screw thread is 3/8 inches. Do you have a replacement anchor screw for this size screw?
Reply
Hello Robin, at this time we do not have a replacement we can suggest that will replace your unit.
Reply
