?     Asked on 9/11/2019by Inyo Visitor

I have a USMotor model k55hxkpp-9735 hp .4 ph 1. RPM 825. Is this motor compatible with mine? Thanks
 Reply

A  Answered on 10/3/2019 by InyoPools Product Specialist Michelle B.

Hello, Unfortunately, this will not fit your motor.
 Reply


?     Asked on 4/4/2020by bill

is this motor an exact match to an emerson K55HXKPP-9735. THAT IS A PLUGAND PLAY / NO MODIFICATTIONS
 Reply

A  Answered on 4/8/2020 by Aqua Cal

Good Morning Bill, Hope you are doing well. The part number ECP0075 (ECS0075) is a direct drop in for the T075 Tropical unit. The numbers on the motor itself may not match up exactly as the motor manufacturers will change nomenclature at their discretion, but wiring will remain the same. Thanks Robert Brown AquaCal Tech Support
 Reply


?     Asked on 6/24/2020by Inyo Visitor

I have a US Motor K55HXPPC-1574. Is this motor an acceptable replacement? The Heat pump is an Aqua-Cal T075AHDSBNB
 Reply

A  Answered on 7/6/2020 by Aqua Cal

Good Morning, Hope you are doing well. That is the correct fan motor for your heat pump. Thanks Robert Brown AquaCal Tech Support
 Reply


?     Asked on 8/20/2020by Inyo Visitor

I have an ats12000a-a what fan motor do i need? thanks
 Reply

A  Answered on 8/24/2020 by Aqua Cal

Good Morning, Hope you are doing well. The ECS3114 would be the correct fan motor for that unit. Thanks, Robert
 Reply


?     Asked on 10/2/2020by timmy potter

Does this fan motor fit model number TT120A-A?
 Reply

A  Answered on 10/14/2020 by InyoPools Product Specialist Joe S.

Hello Timmy,Yes, the Aqua Cal FAN MOTOR 1/4 HP 825 RPM TROPICAL 75 would be the correct replacement for the TT120A-A.
 Reply


?     Asked on 9/29/2021by KEN

Do you have a replacement fan motor for my Leisure temp/Aquacal LT0700AHDSBNA pool heater? Manufactured in 2014. Thank you.
 Reply

A  Answered on 9/30/2021 by Aqua Cal

Good Morning Ken, Hope you are doing well. The part number for the fan motor is the ECS0110. Inyo Pools will be able to assist with pricing & ordering. Thanks, Robert Brown AquaCal/AutoPilot Tech Support
 Reply


?     Asked on 10/14/2021by Inyo Visitor

Have a Leisure Temp LT0600AHDSBNA. The fan hums when trying to start. I can spin the fan and it will run. Do I need the fan or a starter capacitor and what is the item number and price.
 Reply

A  Answered on 11/4/2021 by InyoPools Product Specialist Rich N.

It sounds like you might only need a start capacitor for the fan motor.  We have this ECS0044 5/440 V CAPACITOR listed as the start capacitor for your FAN MOTOR 1/4 HP 825 RPM TROPICAL 75 - ECS0075. 
 Reply


?     Asked on 11/9/2021by Rick Gray

I have AQUA Pro Sunrunner Heat Pump model #SUN1300AHNC Looking for a fan motor to replace the 1/3 hp 825 RPM 4 wire (plus ground) original. Will the AquaCal ECP0075 / ECS0075 FAN MOTOR 1/4 HP 825 RPM which replaced the discontinued 1/3 hp ECS3114 work.
 Reply

A  Answered on 11/12/2021 by Aqua Cal

Good Morning Mr. Gray, Hope you are doing well. As I cannot be sure that AquaCal built your particular Aqua Pro Heat Pump, I cannot advise as to if the ECS0075 will work in that machine. I can say that the ECS0075 has been authorized as the the replacement for the ECS3114 by our Engineering Department. I imagine, this should work just fine in the AquaPro but can offer no guarantees. Thanks Robert Brown AquaCal Tech Support
 Reply