the 3way valve i have is non unions,it has 1.5"pvc glued inside one of the outlet and 2" pvc glued outside of the valve. Can i replace with this valve that has unions?
Reply
Hello Romeo, All you would have to cut the original valve out and re-plumb the one with unions into you PVC.
Reply
Because I have an existing setup, and due to the fact I don't have much space to work with, I need to know the dimensions of the product to see if the diverter will fit my current set up.
Reply
Here are the Dimensions for 25923-159-000 Valve
Reply
I have a 3-way diverter valve that I want to replace with one with that has unions since I'm replacing the entire pump. The valve has both 2" an 1-1/2" lines glued into the slip-on
Reply
Hi, Chuck. This valve can be used for 1-1/2" or 2" valve. I would recommend using all 2" pipe for the new installation.
Reply
I want to bypass my heater. Can I use any of the ports as the inlet ? Please explain. Thank you.
Reply
Hi, JDS. The installation or setup of the will determine which port will be designated as the inlet. The parallel ports will be used as the inlet, use this Manual Bypass Diagram as a guide.
Reply
Will a 1.5 inch hose fit over the slip? Or is it 2 inch outer 1 5 inner?
Reply
Hi, Nicole. This Diverter Valve is designed for 1-1/2" pvc only socket connection, not hoses. As for the 2" pvc option, the P/N is 25923-209-000.
Reply
Can you describe the diverter part of the valve (Ex.: does the rotating portion create a smooth curved 90 degree transition?
Reply
Please click here to view our "How To Repair a Diverter Valve" how-to guide which will give you some insight on how these types of valves function. This guide also has images that will give you a better visual.
Reply
can this valve be used to blend skimmer & drain water to pump
Reply
Yes, you may install the 3-Way Valve with Unions, 1.5" Slip Clear CPVC - 25923-159-000 to divert water from the main drain or the skimmer.
Reply
