Hi - I need to rebuild my hayward variflow 715 valve. I need the spider gasket, the large round gasket, and the smaller gaskets plus the spring. This kit seems to not have the spider gasket. there is no picture. the tuneup kit one looks like it has 5 total gaskets.
Reply
Steve, The spider gasket is included with the SP715 Multiport Valve O-Ring Kit (INCLUDES SPRING).
Reply
Hello, are these genuine Hayward parts?
Thank you.
Reply
Hello Joe, the APCK1034S Kit Includes: 3: O-rings, 1: Gasket, 1: Spring, 1: 6 Gram Silicone Packet which are the generic pieces for the Hayward Multiport Valve - 2" Models SP715 & SP716 .
Reply
will this work with my SP715XR50
Reply
Hello- Yes the APCK1034S SP715 Multiport Valve O-Ring Kit (INCLUDES SPRING) will work with your SP715XR50.
Reply
will this work for Jacuzzi model # 39263030 thanks Gregg
Reply
No this is not the correct kit, you would require this Jacuzzi Valve Kit here.
Reply
I have an SP715XR50. I'm getting DE returning thru returns into the pool. Will the O-Ring Kit correct this and will this kit fit my valve ?
Reply
Hi, Ron. This o-ring kit will resolve the problem if it is caused by the valve. They are other things within the filter that can cause DE to get into the pool. You can read our Getting DE Powder Back in Your Pool blog and review our How To Prevent DE Filter Powder Returning to Pool guide for other troubleshooting suggestions.
Reply
Your Hayward multiport valve repair kit APCK1034S list a "non metallic bearing" and the bag it is in says "Gasket"
part # APCG3321. Where does this go? It doesn't fit the shaft under the handle, and didn't show up when I took it apart?
Reply
Hi. Jim. The non metallic bearing is placed under the handle in the center of the Cover Assembly.
Reply
Ah, but it doesn't fit on the shaft. The hole is to small and if it is forced on it curls.
Reply
Hi, James. The ID of that bearing should be 1-1/8 inches, please confirm.
Reply
Hi James I am having the same problem with the non metal bearing not fitting down over the shaft under the handle. I just got told they sent the correct part. They did not. First bad experience with inyo.
Reply
I have a Hayward Vari-Flo Valve model SP0715G11M and need a tune-up kit; spider gasket and O-ring. I don't see an exact match to my model. Is the "SP715" designation usable on my model?
Reply
I have the Hayward SP715XR50. It is not turning. Will this kit fix it? Do I get a handle separately? Thanks in advance!
Reply
I have a Hayward Pro Series sand filter (S244T) Is the SP715 Multiport Valve O-Ring Kit compatible. Thanks
Reply
Hi Robert, can you provide the multiport valve model number which should be on the top of the valve label itself? If not legible, could you send us a few photos? One one of the complete valve and one of the top of it looking down on to it? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Is this kit compatible with a SP714T Vari-Flo valve?
Reply
will it work on a SP0715G ?
Reply
Hi Louis, this SP715 Multiport Valve O-Ring Kit - APCK1034S will be perfect for your SP0715G valve.
Reply
WILL THIS SEAL WORKS ON SPO715BT?
ALSO DO WE NEED O RING TOO?
Reply
Hello Akhil, yes this o ring kit is compatible with the Hayward SP0715BT multiport valve. I have also emailed you an estimate connected to your account with us that you can convert to an order if you would like. The kit is in stock and ready to ship.
Reply
-APCK1034S.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-APCK1034S.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "SP715 Multiport Valve O-Ring Kit (INCLUDES SPRING) - APCK1034S")