?     Asked on 4/7/2015by Inyo Visitor

Does this pump come with the unions shown in the picture?
 Reply

A  Answered on 4/8/2015 by InyoPools Product Specialist Robert M.

The unions are included with the pump.
 Reply


?     Asked on 5/4/2015by Jeff Graves

Is this the newer replacement for the 02093637-2 pump? Thank you! Jeff
 Reply

A  Answered on 5/4/2015 by InyoPools Product Specialist Lennox H.

Jeff, The CircMaster CMHP 1/15Hp 115v (02093000-2010) is the current model number for model # 02093637-2.
 Reply


?     Asked on 5/28/2015by Inyo Visitor

Will this replace the 002093641-2
 Reply

A  Answered on 5/28/2015 by InyoPools Product Specialist Lennox H.

CircMaster CMHP 1/15Hp 115v (02093000-2010) will replace the 002093641-2 model.
 Reply


?     Asked on 5/17/2017by Larry Edmonds

Will the 002093000-2010 replace the leisure spa 5kcp35dnb819x
 Reply

A  Answered on 5/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Larry. Yes, this CircMaster pump is a suitable replacement for the Leisure Spa pump.
 Reply


?     Asked on 8/21/2017by Inyo Visitor

Is this a direct replacement for a Aqua flo 02093635-2 Thanks
 Reply

A  Answered on 8/21/2017 by InyoPools Product Specialist Lennox H.

Hi. This is a direct replacement for the  AquaFlo 02093635-2 pump.
 Reply


?     Asked on 4/18/2018by Dontavis Brown

Can anyone tell me what size compacitor I need for this motor. Just bought the house and the compacitors wasn't on the pump.
 Reply

A  Answered on 4/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Dontavis. The replacement capacitor for this pump is not available as a separate part, you will have to replace the pump. 
 Reply


?     Asked on 3/10/2019by Dusty

Are there connectors to connect to regular hose pipes? Is it easy to change to connect power to extension cord? Plan to use to connect to solar heater panels for pool.
 Reply

A  Answered on 3/10/2019 by InyoPools Product Specialist Lennox H.

Hi, Dusty. This pump has unions for 1-1/2" pvc pipes. Yes, it is easy to install a power cord. 
 Reply


?     Asked on 10/12/2019by Madi

How difficult is it to rotate the discharge so that it comes out horizontally rather than vertically?
 Reply

A  Answered on 10/14/2019 by InyoPools Product Specialist Steve M.

Madi, it is fairly easy to rotate the discharge on the AquaFlo Gecko Alliance CMHP Pump 1/15 HP 115V, 1SPD - 1.5" SIDE DISCHARGE - 02093000-2010. We do however suggest contacting the manufacturer for the best advice on completing the rotation. Aquaflo can be reached by calling 800.221.1750.
 Reply


?     Asked on 10/14/2019by Madi

So can y’all rotate it before sending or do we still do the rotating either way?
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Hector F.

Unfortunately, we would not be able to rotate that for you. You would just need to remove the thru-bolts that feed into the pump from the back of it then rotate the wet end. 
 Reply


?     Asked on 1/19/2020by KEN

My old circ pump 5KCPDNB819X says frame is 56y out side thread 2 3/8" PLEASE recomend new unit THANK YOU KEN
 Reply

A  Answered on 1/24/2020 by Industry Professional

5KCPDNB819X is motor only info that does not search, there should be more model info on the pump possibly on another label.
 Reply


?     Asked on 3/30/2020by Fred

I bought this pump a few years ago to replace the pump on my spa. It worked great and still runs. The seal on the motor shaft to the pump is leaking. Can I get a new seal? Thanks Fred
 Reply

A  Answered on 3/30/2020 by InyoPools Product Specialist Lennox H.

Hi, Fred. The replacement Shaft Seal  - PSR-200 and Housing O-ring - 251 are available. 
 Reply


?     Asked on 4/3/2020by Inyo Visitor

Will this pump be a good replacement for a Marquis 3 person spa?
 Reply

A  Answered on 4/9/2020 by InyoPools Product Specialist Patrick P.

Hi, Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper pump recommendation.
 Reply


?     Asked on 5/29/2020by Bernd

Is this pump a self-prime type and what is the lift (suction)?
 Reply

A  Answered on 12/23/2020 by InyoPools Product Specialist Hector F.

Hi Bernd, these spa pumps are gravity fed and so are not designed to self-prime or to pull water up from below it. 
 Reply


?     Asked on 6/3/2020by Amy

Does this replace pump model 02410512-2 from a Sundance Spa?
 Reply

A  Answered on 6/4/2020 by InyoPools Product Specialist Hector F.

Actually, the direct replacement for your model 02410512-2 pump is part number 34-402-1142 that you can view by clicking here
 Reply


?     Asked on 10/8/2020by KEN

Hello will this replace marathon electric model 5KCP35DNB819X THANK YOU KEN

 Reply

A  Answered on 10/9/2020 by InyoPools Product Specialist Hector F.

Ys this is the correct replacement pump for your model 5KCP35DNB819X. 
 Reply