How many light features can we have in one controller?
And can we have other kind of led water features together with the led water fall?
Reply
Hello Cruz - The LED Waterfall Controller can control Brilliant Wonders Led Waterfalls up to 20' in combined length. For example, one controller would work for five 4' waterfalls. This is not designed for water features other than the waterfalls.
Reply
how to install the control
Reply
3. Installation and Wiring Diagram Connected to RGB module as an example Note: Ensure all wire connections and polarities are correct before applying power. Controller Mounting CMP recommends a NEMA 3 or equivalent enclosure for outdoor installations (Fig 1). For indoor installations, a junction box may also be required dependent on local codes and regulations. a. The controller is not waterproof and must be protected from the sun and rain. b. The enclosure or junction box must be installed per the National Electric Code (NEC) requirements as well as comply with any local codes and regulations c. The enclosure must be non-metallic(plastic) to ensure adequate RF signals are achieved. d. For product longevity, ensure proper ventilation where both the controller and power supply may be mounted inside the same enclosure in elevated outdoor temperatures
Reply
Can these waterfalls work with ColorLogic instead of the proprietary power/remote controls?
I want a fully integrated solution, have budget for 1 sheer descent and 2 deck jets. New install pool.
Reply
Hi, Craig. Unfortunately, the LED Waterfall can only work with this Controller.
Reply
I'm ordering a 48 inch LED waterfall light and two 24 inch Waterfall light as well as the controller. Is that all that is reqjired to make it work. What does the Sync do that the controller doesn't.
Reply
I purchased a LED waterfall with remote from INYO POOLS. I am sad to say I dropped the remote and now it is broken. I would like to buy another remote control only. Please give me a price. My number is 786-277-1268
Reply
Hi, You would require the PL9800 Remote and Controller for $249 unfortunately the remote is only sold with the controller.
Reply
Wil the controller remote and power supply pL9802 work either the brilliant wonders series 25677 and will it change to a white or clear color.
Reply
Hi Tom, Yes this controller, remote and power supply pL9802 will work either the brilliant wonders series 25677 and will it does change to a white or clear color.
Reply
Purchased t3-5a controler. It came with a 12v 150w power supply but no directions with power supply. Power supply input has 3 wires blue, yellow and brown..... does not follow normal wiring design. What wires do I connect to 120 power and neutral? What is third wire, ground?
I can send pic if needed.
Reply
Jim, You can find wiring instructions in the owner's manual.
Reply
will 1 remote kit control 2 lights i have an 18" and a 36" lights, also do i need another pump besides to pool pump that supplies the water to my waterfall
Reply
Hi John, You will only need one remote control kit for your 2 waterfalls, the control will turn both lights on and off at the same time not independently. If possible we would suggest a separate pump for the waterfalls. We would suggest a pump that could output at least 60 GPM's for an 18" and 36" waterfall.
Reply
do i replace my pool pump or do i add another pump? and how would i connect it to the lights
Reply
Hello, You would be able to use your current pump on this. You would hook it up to electricity to get it to turn on.
Reply
Can this system be controlled by your phone through an app
Reply
Will, we apologize, however, there is currently no way to connect the LED Waterfall Controller, Remote, & Power Supply (Required) - PL9802 to a smartphone app.
Reply
If I am reading all of this correctly, one needs both of these: 36" LED Pool Waterfall Color Changing w/ 6" lip - White - $499 and LED Waterfall Controller, Remote, & Power Supply (Required) - PL9802 - $349
This something that has to be installed when the waterfall is built or is this something that can be attached afterwards?
Reply
Hi CJ, Yes you are correct you will need both the waterfall and the PL9802 waterfall controller, Remote and Power Supply. The waterfall is needed at the time of doing the waterfall but the PL9802 LED Waterfall Controller, Remote, & Power Supply can be purchased and installed after the building of the waterfall.
Reply
