Product Description

REPLACEMENT COLOR CHANGING LED POOL & SPA LIGHTS

Pure Colors replacement LED pool & spa bulbs offer seven solid colors, and nine light shows that can instantly transform your pool area into a color-rich paradise. The Pure Colors bulb uses an Edison screw in base, so they install easily into your existing fixture in just minutes. Plus, LED technology makes them the most energy efficient and longest lasting bulb on the market. This version of the PureColors LED Bulb comes with a RF Remote Control meaning that your pool can be easily turned on by the hand held remote which is included with this bulb or by a standard light switch.

ADVANTAGES:

• LED technology
• RF Hand Held Remote Included
• Operation through Hand Held Remote and/or Light Switch
• 80% Operational Cost Savings
• Standard screw in light base for quick & easy replacement
• Synchronize multiple lights to operate in unison
• 50,000 hours Lifespan
• 2-year warranty
• 441LED's

COMPATIBILITY:

• Hayward® Astrolite SP058 Series
• Pentair® Amerlite 784 Series
• Note: Not compatible with Swimquip® Light Fixtures or Hayward® SP0540 series.

F.A.Q's

Will the PureColors Pool LED Bulb with RF Remote synchronize with the standard PureColors Light Switch Control Bulb? The PureColors RF Remote Control Bulb will not synchronize with the with the PureColors Light Switch Control LED Bulb as the inner control board of the two bulbs are different as well as the color show programs.

Will two RF Remote Bulbs Synchronize with each other? If you have two RF Remote bulbs they may not always synchronize. Because the lamps are installed underwater and the water will block the signal in various degrees, also since the bulbs are at different distances this can affect synchronizing. The remote will turn both lights on and off and set set the lights to a fixed color without a problem but the color shows may fall out of synchronization. Most likely your lights will also be hooked up to a light switch and if the lights are wired to the same switch then cycling through the color show with your light switch instead of the remote will ensure that the bulbs synchronize together in color changing mode.

If I have two PureColors LED Bulbs with RF Remote control, will one remote work on both bulbs? Yes one remote can be used for both bulbs. Remember you must have two RF remote bulbs as the RF remote will not turn on Non RF remote bulbs.

What do the 4 buttons on the remote control do? Button #1 is for cycling through the 7 fixed colors of the bulb. Button #2 is for cycling through the 5 color shows of the bulb. Button #3 is for adjusting the changing speed when the bulb is in color changing mode. Button #4 is to turn the bulb on & off.

Can you change the functions of the 4 buttons on the remote? No the functions on the remote control cannot be changed and they are pre-set.

Do these bulbs have memory? When turning the bulbs on and off with the RF remote control then the bulbs do not have memory, meaning that if you had your bulb set on blue and if you turn your bulb off for more than 15 seconds then the next time you turn the bulb on with the remote then the bulb will not turn back on in the color of blue. The bulbs do have memory when you turn them on and off using your light switch meaning that if you have your bulb set to green and you turn the bulb off using your light switch then the next time you turn your bulb on using the light switch then the bulb will be in the green mode.

What is the Range of Remote Control? The remote control distance is 330 Ft. in an open place. When indoors with walls and doors it will be shorter, about 75' to 150', depending on the block condition.

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Review Summary