$32.60
By Wilbar
Part # AR769-01102AB
Ledge Cover - Forum Clay (Single). This includes the interior and exterior piece.
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
I need to replace all of my ledge cover (18 total) Your part number is AR769-01102AB If you look at the size Left is 6 3/4" and the right is 6". My ledge cover looks the same but the measurement to the left is 6 1/4" and the right is 4 1/4" My pool is a Muskin above ground pool about 20 years old. The ledge clamp (back) part number is 01064 and the ledge clamp (front) part number is 01063. Thanks for helping
Reply
Is the collar available for this top cap? Also, the plastic button that coveres the large screw on the top, does this come with it?
Reply
Unfortunately, do not have any specs regarding the collar or button that you are referring to for the top cap that you provided.
Reply
Is this a replacement for the outer ledge cover (part no. 01068) and inner ledge cover (part of no. 01069) of a Zodiac/Ovation Classic and Palladian above ground pool?
Reply
Hi. Unfortunately, there is not an alternate replacement for this Ledge Cover.
Reply
