By Wilbar


Details

Top

Part # 1030033F00

Product Description

Ledge Cover - Gray (single)

Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort  that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below.  Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.

Click here to submit the information requested below.

*   Size of the pool & approximate age of the pool?

*   Image of the pool wall.

*   Image of the upright

*   Image of the top rail connection to the upright.

*   Name & age of the pool (if known) 

Product Specifications

Commonly Used On:
Aqua Leader Parisien
Top

?     Asked on 4/27/2017by Inyo Visitor

I have been looking for a replacement top cover for an aquasphere pool. This is the closest one I have found. do you know if it would fit or where I might find the part. I have looked at several places and can not find it anywhere. thanks
 Reply

A  Answered on 4/27/2017 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, I was not able to locate any info on Aquasphere Pools. If you can send us photos of the following info we can try to identify your pool and maybe replacement parts. The Size of the pool & approximate age of the pool?*   Image of the pool wall.*   Image of the upright*   Image of the top rail connection to the upright.*   Name & age of the pool (if known).
 Reply


?     Asked on 7/1/2018by Inyo Visitor

I am looking for something similar to this, but 6 inches across the top of rail and 6 inches wide. Do you have anything like that? It needs to be at least 1 inch down to attach at the upright also. The ones we have are two pieces. Very old pool.
 Reply

A  Answered on 7/2/2018 by InyoPools Product Specialist Andy O.

Thank you for contacting INYO Pools. Unfortunately, the above ground pool parts are not universal. Before we are able to recommend replacement parts, we'll need to identify the pool. Can you please send us the following images by emailing upload@inyopools.com or clicking here!Outside Pool Wall (Top to Bottom)Top CapTop RailUpright
 Reply


?     Asked on 7/25/2018by Roger LeBlanc

will this work on a Coleman Power Steel Swim Vista Pool
 Reply

A  Answered on 7/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Roger. Unfortunately, this Ledge Cover will not work on a Coleman Power Steel Swim Vista Pool. 
 Reply


?     Asked on 5/27/2019by Susan Jones

I am searching for replacement top cap for a Patriot above ground pool (Silverado model) that is at least 13 years old. Do you have anything that would be compatible?
 Reply

A  Answered on 5/28/2019 by InyoPools Product Specialist Robert M.

Hello Susan - The Patriot pool was made by Delair. Unfortunately, we do not have top caps that will work. We recommend trying www.teddybearpools.com. They carry Delair parts.
 Reply


?     Asked on 5/28/2019by Inyo Visitor

I need to know if this cap will work for pool rail that is 5 1/4 inches across top, inside down leg is 1 1/4 inch and outside down leg of rail is 2 1/4 inch. Thanks

 Reply

A  Answered on 5/29/2019 by InyoPools Product Specialist Robert M.

It looks like you have the Vogue Podium model. The correct top cap is GR101-22100ABC. That cap is no longer available and Vogue does not offer a replacement. They advised us that 1030033F00 would not work.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

0     1

Tree destroyed a side of my pool.

Written on 5/12/2018 by Guest

After removing the old parts and straightening my pool wall and replacing the 52" upright, pool wall stabilizer, two top upright caps, I was able to replace my cover caps with these ledge covers. The holes lined up perfectly and the whole process took less than an hour with the help of these exact match parts.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

0     1

Old ledge cover was cracked

Written on 7/10/2017 by William V.

Took old one off, placed new one in place and screwed it on

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Dremel tool

1     1

Old top caps were all broken and we were unable to find replacements!

Written on 7/1/2017 by Guest

The top caps looked the closest to what we were trying to replace on our 20 year old Haugh pool. (A Namco COOL pool) While undertaking a replacement of the liner, it seems each piece we removed needed to be replaced. Top caps were the hardest thing to find and we found the Inyo inventory the most expansive to choose from. With some minor alterations using a dremel cut off tool, the fit was just right. Our experience has been positive with INYO and I would highly recommend this company!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.67  out of 5 stars)
3 Rating
5 star:
 
(2)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews