$20.64
Part # 10110
Oyster Bay 7000 clamp base cvd/str gray (Single) Up Right 6” (Inner) 49 1/2” (Single)
Save $$$ on a 10-PACK (10110-PACK10)
Used with:
Please Note: All above ground pool part sales are Final - No Returns for Credit. Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models. Click here to submit the information requested below. * Size of the pool & approximate age of the pool? * Image of the pool wall. * Image of the upright * Image of the top rail connection to the upright. * Name & age of the pool (if known)
I need to know if this is the base that goes with the cap #31063-6
Reply
Thank you for contacting INYO Pools. Unfortunately, the above ground pool parts are not universal. Before we are able to recommend replacement parts, we'll need to identify the pool.Can you please send us the following images?Outside Pool Wall (Top to Bottom)Top CapTop RailUpright
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set
I bought the house in December and it came with an above ground pool. After seeing various problems around the house, I became more and more nervous about the condition of the pool.
When I took the winter cover off, what I found was not a surprise. Several of the top caps were broken or missing. I consulted with the identify your pool forum here on Inyo and they led me down the right track to find the make and model. When I found out how old the pool was, I was discouraged, but lo and behold, Inyo had the parts I needed.
To replace them I had to remove what remained of any of the broken top caps then unscrew the top rails and then undo the 2 screws on the top bracket that the upright fastened to. I was then able to slide that bracket out of the way to replace the top cap clamp base which was held on by 2 screws.
I then reversed the process to put everything back together and then replaced the top cap with new parts as well. I did one at a time so as to not take a chance of the pool falling apart.
All in all the pool looks much better and I will be able to open it up this year as is. Next year will be a new liner.
Thank you Inyo
Less than 1 hr
Nut Drivers, Socket Set
When I opened the pool this season, i found several of these pieces broken. I went to the store where I bought the pool and they no longer sold oyster bay pools. They said they had no parts. So I googled the piece I needed and found them on INYO POOLS. I ordered them and had them three days later! Now my pool is safe and looks like it did when it was new! Thanks!
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Fit perfectly
Was this review helpful to you?