$17.90

Qty:

By Wilbar

High Return Item
This item is often ordered incorrectly. Please verify details or contact support.

Details

Top

Part # 13614

Alternate Part #'s 12742, 13345, 21594, 5256

Product Description

Top Cap Resin Taupe (Single)  DOES NOT INCLUDE SUPPORT #13615

 Save $$$ on a 10 Pack - Part Number 13614-PACK10

This cap is available in an Ivory color. The part number is 21594.

Used With:

Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below.  Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.

Click here to submit the information requested below.

*   Size of the pool & approximate age of the pool?

*   Image of the pool wall.

*   Image of the upright

*   Image of the top rail connection to the upright.

*   Name & age of the pool (if known) 

Product Specifications

Front Width:
6 in.
Back Width:
3-1/2 in.
Depth:
6-1/4 in.
Top Cap Support:
13615
Commonly Used On:
Sequoia, Durango & Silhouette
Top

?     Asked on 3/23/2015by ron byrd

What color is this item available in?
 Reply

A  Answered on 3/23/2015 by InyoPools Product Specialist Brian M.

The item is only available in taupe.
 Reply


?     Asked on 6/7/2015by Inyo Visitor

Will this fit a Wil-Bar International above ground pool? It's about 10 years old, round.
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Alex V.

Hello, We will need to know the model of the pool to confirm. If you are uncertain of the model, you can email pictures of the pool wall pattern and top caps you need to replace to upload@inyopools.com.
 Reply


?     Asked on 6/30/2015by John kelly

I have a 24ft rnd Shark line Saquioa. There are 18 posts. The post caps have 12742 stamped inside them. Is this number the replacement. Thank You
 Reply

A  Answered on 7/1/2015 by InyoPools Product Specialist Lennox H.

Hi John, The Top Cap Resin Taupe (Single) will be the correct top cap for your Sequoia pool and the Top Cap Support (Single).
 Reply


?     Asked on 10/4/2015by Kat

I am looking to replace 18 top caps..The only writing or numbers on the one cap, they come in 2 sections, says 360066-BRN and 330166`WHT I am not having any luck finding them anywhere. Can you help. It is an older pool, not sure what kind. bought house with pool.
 Reply

A  Answered on 10/5/2015 by InyoPools Product Specialist Bob D.

Hi Kat. Sorry for the trouble. I don't recognize the part numbers. If you could email us photos of the caps you have as well as a wider shot of the rails they sit on we may be able to find a match with a supplier.
 Reply


?     Asked on 6/2/2016by Gary

I am trying to buy this part in Gray. Part No 12742. I don't see this option. Do you have the Gray ??
 Reply

A  Answered on 6/8/2016 by InyoPools Product Specialist Alan M.

Hello Gary, Unfortunately this part 13614 is not available in grey.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

they needed replacing

Written on 8/23/2023 by Guest

unscrew the old and screwed the new one on it was that easy

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, drill

I have an old pool where the top caps were cut to fit after previous owner added a deck around pool.

Written on 4/20/2022 by Guest

I ordered 4 top caps similar in measurements to try to fit my old pool and this one fits to the deck with adding 1 screw to tighten to the deck.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Old Cracked Pool Caps

Written on 9/11/2021 by Guest

It was hard to find parts for my 19 year old pool, so I was thrilled when I found the perfect match here at INYO! Very easy fix, just remove the old and add the new! The bottom connector pieces were fine so the existing screw secured the new caps in place. No more sharp edges!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

1     0

Replaced 14 year old top caps that were cracking due to age

Written on 8/25/2020 by Guest

Removed screw from bottom cap attached to top cap and was able to use the bottom since it is not exposed to the elements as much as the top cap and removed the top and connected the new one and replaced the screws. It was an easy replacement.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Old caps were brittle and broken.

Written on 6/19/2020 by Guest

Installed new liner. These were icing on the cake in making my pool look great again. Easy install, perfect fit. Packaging and shipping were both excellent for the order. 10+ caps with a few singles was an easy addition in the cart. Thanks.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Replaced old one.

Written on 6/6/2020 by Nick K.

This was a perfect match for color and fit.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

drill

Pool needed new top caps

Written on 8/8/2019 by Guest

Repair was simple, just unscrew the old parts and join the new top caps with bottom caps and screw back together, very easy.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Broken top cap

Written on 8/12/2018 by Guest

Remove single Phillips screw securing top cap through bottom support.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

One top cap was broke

Written on 7/12/2018 by Guest

When my wife and I got the free pool, when I took the pool down from somebody else’s house the lady told me the kids broke it. So I had to purchase one top cap.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver

The top caps faded, became brittle and the returns broke off leaving sharp edges.

Written on 8/21/2017 by Guest

I removed the old caps, matched up the fastening holes to the new caps, drilled the holes and screwed them back in place.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Broken caps on a 16 year old Pool.

Written on 6/5/2017 by Guest

Nothing more simple than loosening the mounting screw and snapping old top cap assembly off then removing the two screws that hold the top cap to the bottom cap section. After screws are out v the twos pieces and reverse the procedure with new cap mounting it to old bottom cap. Then snap new assembly over rail on pool and slide the notch over screw and tighten screws.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.93  out of 5 stars)
26 Rating
5 star:
 
(24)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews