Part # 10291
Bottom Rail Aluminum 49" (Single)
How to Measure the Length of a Rail
1) Use a flexible measuring tape. We found that a tailoring tape worked best.
2) Measure from one end, along the outside bend, to the opposite end
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
Hi. Just wondering if this pool is worth fixing and if parts are available. Don't know the name brand but its about 38 years old. Some of the bottom rails have pushed out and in one place the pool wall has bulged out beyond the rail. Also if you look at the pic of the three side uprights there is a gap at the top between the top of the wall and the top ledge. As far as I can tell these problems are only in one "corner" of the pool.
Thanks
Tony George
401 232 3726
Hi Tony, a good quality above-ground pool lasts between 10 and 20 years. It might be time to replace it, since bulging walls can be dangerous. Our guide on Top Reasons an Above Ground Pool Needs Replacing may help you make up your mind.
Reply