Part # PL7431
Warranty 18 Year (2 Years Full)
PURELINE: CUTTING EDGE SAFETY COVERS
Our Pureline Safety Cover is renowned in the industry for its strength, durability, and ease of installation. In addition, it is a maintenance-free cover that provides pool owner complete peace of mind during the off-season that their pool investment is not only protected against the elements but also, will not pose a danger to unexpected visitors.
KEY FEATURES
The new, improve and increased weave count contained within our polypropylene mesh fabric ensures added strength, sustainability and shading protection
Contains our patented mesh material blend, which eliminates any standing water hazards by allowing water and melting snow to drain through and minimizing damage risk, as well
Automatically screens out dirt and debris for a quick, easy and fuss-free springtime opening
Created with the finest materials in the industry for strong, safety-first protective results
Secures pool from children, pets and stray animals.
Designed to be a tamper-proof design by preventing entry without the need for an installation rod, which means it can be installed and removes within mere minutes
Improves the look of your pool in the off-season.
Fastest turnaround times in the industry!*
Meets or exceeds all safety cover performance standards as set forth in ASTM F 1346-91.
Upgraded 18-Year Limited Warranty.
Click here for more Pool Safety Covers
Are there seconds available in these covers. I need a cover to temporarily cover 18 x 36 pool w/center end steps for a few months prior to filling pool in.
Thanks,
Reply
Good afternoon, this cover will have 5x5 spacing with 28 Anchors 65 inches apart.
Reply
does this safety cover block the sun light out? Also does the rain water drain through into the pool?
Reply
Hello, yes this unit will allow water to pass through and block up to 99% sunlight Penetration.
Reply
Is this cover shaped as shown for roman end pools?
Reply
Hello Meredith, this is how it is shaped in the picture, if it is any different you need to fill out custom cover sheet. http://media.inyopools.com/documents/form/Inyo-Safety-Cover-Measuring-Form-2015.pdf
Reply
Does the w/ 4x8 mean the additional piece that is added for the steps? Also, what are the actual outside dimensions of the cover before adding the "step piece". Thank you
Reply
Hi, William. The cover has an additional 4' x 8' section for the steps. The cover is 20' x 38' not including the step section.
Reply
4 to 8 hrs
Hammer drill, shop vac, hammer, chalk line
1 0
I just recently installed the Mesh Winter Safety Cover for the time and solo. Following the instructions were straight forward. Some tips I could give are:
1. Have a friend help roll it over the pool. Otherwise, everything else can be done solo.
2. When slipping on the buckle and spring, the instructions say to leave 4 inches between the buckle and cover edge, but if you look at the diagram it shows 3 inches. Use the 3 inches. I think the 4 inches considered the 1-inch buckle length.
3. I used a hammer drill to drill the concrete holes. I would recommend a rotary hammer drill instead. Still, you can mimic the rotary part by twisting the hammer drill while drilling or lifting it out and turning it every so often so the bit does not get stuck in the hole. Use a shop vac as well to suck the dust out while drilling.
4. Obvious tip but mark with a piece a tape 1 7/8" on your drill bit for consistent hole depth.
5. You may need a larger (more leverage) 5mm Allen key than provided to screw in the anchors.
1 to 2 hrs
None
2 0
The Most Recent Reviews
(4 out of 5 stars) Initial Review: Would Recommend
Reviewed By: Inyo Customer ()
Initial review: this is my first pool cover owned. This is cover was the best price with the best warranty on the internet. Installation by myself took roughly 7 hrs but was fairly straightforward. I would recommend this cover to others.
Was this review helpful to you?