$969.00

Qty:

By AquaVac


Details

Top

Model # W3RC9740CUB

Manufacturer Code RC9740CUB

Alternate Part #'s RC9740CUB, HAYW3RC9740CUB, HPPW3RC9740CUB

Product Description

 

SharkVac SeriesProduct Description

Both SharkVac and SharkVac XL™ by Hayward® are built with the highest-quality components and proven technology that create reliable, consistent results while maximizing energy efficiency. Whether you clean your pool floor and coves with SharkVac or cover the floor, walls, coves and waterline with SharkVac XL, the cleaners’ robust, low-profile design and top-access filters give them an added bite.

 

Efficient cleaning program

  • Uses smart steering technology that provides an efficient cleaning pattern, scouring pool floors and coves in just about 2 hours
  • For full pool coverage including walls and waterline, try the SharkVac XL.
  • Calculates the size of the pool and programs itself into the most time and energy efficient pattern
  • Proven TigerShark components utilized through this new design
  • Floor-specific technology — gets the dirt where it lies
  • Optional KD Caddy

 

Model Cleaner Type Pool Coverage Cleaning Cycle Pool Size Pool Surface
RC9740CUB Robotic Pool floor, coves 2 hours up to 20' x 40' Gunite, Vinyl, Fiberglass, Pebble and Tile

Product Specifications

Caddy Included:
No
Cord Length:
50 ft.
Cleaning Cycle:
2 hrs
Manufacturer:
Hayward
Cleaner Type:
Robotic
Pool Surface:
All
Pool Size:
Up to 40' Long
Pool Type:
In Ground
Top

?     Asked on 6/12/2015by pierre dalpé

here is my problem. the dirth goes out by the top of the motor. i clean the filter and the bucket.can you tell me what's wrong with it . i have a e.vac sharkvac robotic pool cleaner. thank's
 Reply

A  Answered on 6/17/2015 by InyoPools Product Specialist Lennox H.

Pierre, You may need to replace the Filter Cartridge (70101) and or the Filter Door if the debris is bypass the unit and getting back into the pool. The filters are probably old that there no longer able to capture the debris so is letting it back into the pool.
 Reply


?     Asked on 2/2/2016by Leslie Miller

Can the Hayward SharkVac be used in a vinyl liner pool?
 Reply

A  Answered on 2/2/2016 by InyoPools Product Specialist Brian M.

Leslies, this information is taken straight from the Hayward Site for the Sharkvac : In-ground residential pools up to 20' x 40'All surfaces - vinyl, concrete, fiberglass, tile pools SharkVac cleans pool floor only. SharkVac XL cleans pool floor coves, walls and waterline.
 Reply


?     Asked on 6/13/2016by Leila

Does the SharkVac clean the walls and stairs of the pool? Also, does it remove the algae and bacteria? Thank you.
 Reply

A  Answered on 6/14/2016 by InyoPools Product Specialist Alan M.

This cleaner does not clean the walls or stairs. This cleaner is a floor specific cleaner. It will vacuum algae from the walls of the pool. Keep in mind that algae is a plant that is growing in your pool and needs to be chemically treated. This cleaner will not remove bacteria. With proper sanitisation levels in your pool, bacteria will be eliminated.
 Reply


?     Asked on 1/7/2017by otto

Does it have a cable swivel -enabling cable cluster free cleaning activity?
 Reply

A  Answered on 1/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Otto. This cleaner's cable  does not swivel.
 Reply


?     Asked on 3/19/2017by Jeff

Replacement belt for drive wheels
 Reply

A  Answered on 3/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Jeff. The Shark Drive Belt - RCX23002 is the belt for the SharkVac - RC9740 cleaner.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

The SharkVac Pool Cleaner that I had stopped working.

Written on 11/16/2023 by Guest

I replaced my SharkVac Pool Cleaner with one from Inyopools. Works great. Just plug and play.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews