$465.92
Part # 94084958
Jacuzzi Laser 19" Sand Filter W/ 1 HP Pump (94084958)
14" (35,6 cm), 16" (40,6 cm), 19" (48,3 cm) and 22,5" (57,2 cm) MODELS feature our Upper Distribution System integrated into the dial valve and engineered for optimum flow – up to 25 gpm/sq.ft. (61 m3/h/m2) without sand migration or channeling.
Non-corrosive resin clamp assures simple installation and service of the 7-Way Dial Valve and filter components.
Underdrain with side-slotted laterals draws water evenly across the full diameter of the sand bed for higher flows, better filtration, longer cycles and more efficient backwashing. Features heavy-duty, freeze resistant hub and easy-service Snap-Fit laterals.
Extra deep sand bed for extended filtration cycles.
Bottom Drain for winterizing and draining.
LR Series Pump with Ring-Lok™ access to strainer basket. Patented air cooled heat sink allows pump to run dry without damage to the shaft seal. UNCONDITIONAL TWO-YEAR WARRANTY AGAINST SEAL FAILURE.
6 ft. (1,8 m) corded models feature a 3-prong, grounded plug.
3 ft. (0,9 m) corded models feature the NEC twist-lock plug (UL listed pump).
Injection-molded, high quality platform base provides a non-corrosive elevated surface for sturdy support of pump and filter.
Will this work for a 24 ft Intex pool?
Reply
This system can be used on an Intex pool. Depending on your Intex equipment, you may need a softside pool adapter to successfully connect the Jacuzzi filter/pump.
Reply
I purchased this item to replace my doughboy pump and filter. I am hoping all connectors will be the same. I did not ask the representative this questions when I called to see if it was a large enough pump etc. Please reply and let me know if this is not going to work. Thank you.
Reply
Hello, The Jacuzzi connections are not the same as Doughboy. What is the size of your pool?
Reply
I have a 24ft pool above ground 13600 gal. what size sand filter do I need??
Reply
The 19" Jacuzzi Laser Sand Filter which is included in this above ground pool filtration system would be perfect for a 24' round above ground pool.
Reply
I have a 24 ft round above ground pool and currently have a jacuzzi maxiplus 190 filter that the seals are bad but the seperate pump works . will my exsisting pump work with this filter or would i need to upgrade that as well ? and are the hose connection standard or some new fanncy things
Reply
Hi Gordon, You would be able to use your old pump. The system on this page is both a pump and a filter. You would need just the Jacuzzi Laser 190 Sand Filter by itself.
Reply
The Most Recent Reviews
(2 out of 5 stars) Wish I could still get these
Reviewed By: Inyo Customer ()
Wish I could still get these
Was this review helpful to you?