Part # 21063-200-000
Hi-Temp Self-Sealing Unions
Commonly Used On
Is this item compatible with both the inlet and outlet of the Hayward RS 1000 pool pump
Reply
Hi. Yes, this union will work with the internal threads of the Hayward RS1000 inlet and outlet ports.
Reply
Does this include 1 or 2 unions? If one, does it matter if used on inlet or discharge side of pump? Thanks.
Reply
Hello- This is just one complete union and it does not matter which side of the pump it is installed on.
Reply
1 to 2 hrs
Screwdriver, PVC cutter
2 0
Step 1: I cut the power on the failed pump
Step 2: Disconnected electrical connections from the pump power cable at the distribution box.
Step 3: using a pvc curing tool I cut the pipes on the suction and output side of the old pump
Step 4: Removed the failed pump..
Step 5: Wired a new power cable to the.new pump.
Step 6 Set the new pump in place.
Step 7: Hand tightened the lubricated MPT socket unions to both sides of the pump and measured for reconnection of new sections of PVC.
Step 8: Wired the pump power cable to the distribution box.
Step 9; Re-plumbed the PVC to the MPT connectors and let the PVC cement cure overnight.
Step 10: turned on the power to the pump and enjoyed an easy repair without leaks with the confidence that the connections at the pump will not expand with the heat of the pump and future repairs will be much simpler with unions at the pump adapters.
Less than 1 hr
saw for PVC plumbing, large channel lock pliers
6 1
After several attempts at stopping the leakage at the pump housing discharge (Teflon tape, pipe joint compound) I decided to use this type of fitting. Removed old fitting, cleaned up the housing threads, lubed the new fitting with silicone lube and screwed into the pump housing. This did require some re-plumbing, but it was minor. This new fitting uses an o-ring seal to the pump housing and has proven to be leak free.
The Most Helpful Review
1 0
(5 out of 5 stars) essential part for pump installation
Reviewed By: Juan R. from Luquillo, Puerto Rico ()
Pros: first class construction
essential part for pump installation first class construction and fast delivery.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Self sealing pump connection.
Reviewed By: Inyo Customer ()
Easy to hand tighten adapters with confidence of no leaks due to the rubber gasket that seal the adapter at the connection points.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works well.
Was this review helpful to you?
(4 out of 5 stars) Four Stars
Reviewed By: Inyo Customer ()
Four stars
Was this review helpful to you?