$878.29

Qty:

By Hayward Pool Products


Details

Top

Part # 2807-47

Manufacturer Code GLX-PCB-AR-PRO

Alternate Part #'s GLX-PCB-AR-PRO, GLXPCBARPRO, _GLX-PCB-AR-PRO, GOLGLX-PCB-AR-PRO, HPPGLXPCBARPRO

Product Description

Main PCB AquaRite Pro - GLX-PCB-AR-PRO

Top

?     Asked on 6/14/2016by Brian Radke

I rec'd the part I ordered today. I want to clarify it is the exact same part. I ordered an Aqua Rite Pro PC Board for Hayward Goldline chlorine generator. On my old part, the part # in upper left is G1-011058A-1. On the new part, I rec'd, it is G1-011058B-1 The only difference in part # is the A and B. I want to make certain this is the same part. Thanks! Brian Radke
 Reply

A  Answered on 6/17/2016 by InyoPools Product Specialist Alan M.

You are correct. These are the same parts.
 Reply


?     Asked on 6/26/2017by Andy

Is this the direct replacement for the G1-011058B-1T? I woke up to a no cell power/no cell power 2 fault, the online Hayward manual states board replacement for this fault code. Is there anything else I can do do besides replace this $600 board? Thanks in advance.
 Reply

A  Answered on 7/29/2017 by InyoPools Product Specialist Alex V.

Andy, I would recommend having the cell tested. If the cell tests ok, the board will need to be replaced. 
 Reply


?     Asked on 6/2/2018by Alice Malek

I need a replacement board for Gl-085013H-2T Hayward Swim Pure Plus. Is this still available or one that will work with my system?
 Reply

A  Answered on 6/2/2018 by InyoPools Product Specialist Lennox H.

Hi, Alice. The replacement PCB for the Hayward Swim Pure Plus is Part # GLX-PCB-RITE 
 Reply


?     Asked on 5/28/2019by Ed Dwyer

I have Goldline ProLogic control board that has gone bad. The part number is G1-011049F-1 noted on the bad board. Is the GLX-PCB-AR-PRO the right replacement part, or is the GLX-PCB-PRO the right part?
 Reply

A  Answered on 10/4/2019 by Industry Professional

GLX-PCB-PRO should be the correct board
 Reply


?     Asked on 6/26/2019by Jason

I upgraded my variable speed pump drive controller to Rev 3.11 (SP3200DR), and about 2 months later my control board went out. I'm not sure what matches with that, but my old control board is G1-011049F-1 F (about 5 years old). What is the new board number I need to be compatible with this newer drive unit?
 Reply

A  Answered on 10/2/2019 by InyoPools Product Specialist Steve M.

The _GLX-PCB-AR-Pro appears to be correct but we are not getting 100% confirmation. Hayward has very good support & we suggest you verify by calling them direct @ 908) 355-7995
 Reply


A  Answered on 9/26/2019 by Industry Professional

The _GLX-PCB-AR-Pro appears to be correct but we are not getting 100% confirmation. Hayward has very good support & we suggest you verify by calling them direct @ 908) 355-7995
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)