$503.24
By Zodiac
Part # 2803-024
Manufacturer Code R0403800
Your Source for Jandy AquaPure Parts
The flow sensor came with a small circuit board that was suppose to be connect the flow sensor to the power board. Do you know how I am suppose to calibrate the flow sensor to the board? Or do I not need the smaller board? It is showing no flow and I cleaned everything ect. Thanks,
Jeff
Reply
Hi Jeff, The Jandy Aqua Pure Owner's Manual stated that you will need to "Turn power off and back on in order to recalibrate and reset Flow/Temp/Salinity Sensor. Reset anytime Flow/Temp/Salinity Sensor is unplugged."
Reply
I am in France, I have a Clormatic III-601 system. and I have the code 172 and 181.
So I think I must change the flow sensor.
Is it the good part for me ?
I don't find it in France, is it possible to purchase it on our site ?
Reply
I would contact Zodiac, the manufacturer, to make sure that one will work with your older system. The flow sensor that was made for your system is part number 2805-021, which is no longer available. So I would give Zodiac a call to be sure part number 2803-024 is compatible with yours.
Reply
