$23.93

Qty:

By Hayward Pool Products


Details

Top

Part # 3259-0017

Manufacturer Code AXV604WHP

Dimensions 6" L x 3.5" W x 1" D

Alternate Part #'s 3259-V115P, ARN2011830, AXV415WHP, AXV604WHP, V115P, V115WHP, 87-150-1136, HAY-201-1059, HAYAXV604WHP, HPPAXV604WHP

Product Description

OEM white wing kit contains 2 wings.  Used on the following Hayward suction cleaners:

  • Pool Vac Classic
  • Pool Vac Ultra
  • Pool Vac XL
  • Navigator
  • Navigator Pro

 

Top

?     Asked on 8/29/2014by Guest

How do I know when these wings, part axv604whp, have gone bad?
 Reply

A  Answered on 8/29/2014 by InyoPools Product Specialist Patrick P.

There is a small line at the edge on the narrow side of the wings of part axv604whp. When the wear has reached this line it is time to replace them.
 Reply


?     Asked on 12/26/2014by Alex

My wing has the letters and numbers VU032 on the inside. Are your wings compatible with my Navigator?
 Reply

A  Answered on 12/26/2014 by InyoPools Product Specialist Andy O.

Part number 3259-0017 is the wings used on all the models of the pool vac. I'm not sure about the VU032, I cross- referenced everthing and checked online and could not find any information from that. But these are the wings that Hayward makes for all of their pool vacs.
 Reply


?     Asked on 6/12/2016by Inyo Visitor

Is this replacement for VU032
 Reply

A  Answered on 6/18/2016 by InyoPools Product Specialist Lennox H.

Hi, If you need to replace the wing kit for the Hayward or Anerson cleaner this is the correct replacement.
 Reply


?     Asked on 4/17/2017by Joe

i am trying to order parts for a navigator pro serial number 303D-355338 and can't find model number on unit. I need the part that the flaps attach to as one of the holders has broken off
 Reply

A  Answered on 4/17/2017 by InyoPools Product Specialist Scott W.

The part that the wing attach to are the pods, part number 3259-0018.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Wings kept coming off

Written on 3/5/2020 by Guest

I received the wings purchased here and they were a bit larger than the ones on my vacuum ... I repacked them and again they care off repeatedly... I finally figured out I needed to change the pods and the shoes so once I did that it’s working again although I do believe these wings are still wrong for my unit.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Wings Hayward pool vac worn out

Written on 8/2/2019 by Guest

Ok if you look under the wings you can see little circles that should be completely closed. If they are not the wings are getting worn or completely worn out and need to be replaced. I always know its time when the pool vac is just not moving around the pool right. Again very easy 2 step process the wings are attached with an over-under hook.

Turn the pool vac upside down and you can see the hook remove the wing install the new ones. Replace both sides at the same time.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

old wings broken

Written on 6/26/2018 by Guest

1. just connected new wings to each side
2. tested in pool and working correctly

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.82  out of 5 stars)
11 Rating
5 star:
 
(9)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews