Part # 4042-13A
Manufacturer Code SPX1070KHR
Dimensions 8.5" X 5.135"
Replaces Hayward SP1070 Series Skimmer Weir Kit - SPX1070KHR
I need a replacement for a Hayward SP1070-KC skimmer flap/door. Which one should I choose? I can't seem to find this code listed.
Thanks.
Reply
Germaine - Part number SPX1070KHR is the correct replacement weir.
Reply
Skimmer door missing. Model SP 1070 Hayward. Need replacement also skimmer basket and socks. Notice small bugs in water.
Thanks.
MLB
Reply
Hi Miguel, This would be the correct skimmer door for your SP1070 skimmer. Here is the Basket for the Hayward SP1070 Skimmer and here are the Skimmer Skum Socks.
Reply
Where does the rubber bumper go?
Reply
There is no rubber bump. The bumper referred to in the name of the product is referring to the foam bumper on the inside of the door which is the large rectangle shaped portion of the plastic.
Reply
2 to 4 hrs
Screwdriver, Hammer, handybar, knee pads,
1 1
Had to look hard for the model #, but Inyo Pools saved the day. Great website.
Bad part was digging out the mounting bracket, pretty tough chore. Of course, no instructions from Haward on how this could be accomplished. Which grout or caulk to use, since hammering out the bracket I managed to put holes in the skimmer housing. Found a good sanded grout in an 11” tube, and it stopped leaking. The ink leak detection is a must.
You must lower the pool level and plug the
main drain suction line.
Have Fun! I sure did! Whew!
P.S. Next time, I’ll wait for a cooler day.
Less than 1 hr
Screwdriver
1 0
All I had to do is unscrew the old broken weir using a Philips screwdriver. Then prepare the new weir flap for installation, in my case I removed plastic base that is screwed on from the factory. I then put the new weir in the skimmer housing and screwed it onto the old existing base that was still attached to the skimmer from the old weir. I did this by myself by another hand to hold the weir flap while attaching to plate might help.
The Most Helpful Review
4 0
(3 out of 5 stars) Need directions
Reviewed By: norcol from Port Charlotte, FL. ()
Pros: I suppose it works
Cons: no instructions
I guess it's ok. Would be really helpful to get some instructions on how to replace the defected ones.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
fits well
Was this review helpful to you?
(5 out of 5 stars) The right fit!
Reviewed By: Jenna K. from PA ()
I compared pricing for this product across various websites. This site had one of the lowest pricing with good quality. Works as described.
Was this review helpful to you?
(5 out of 5 stars) Exactly what I was looking for
Reviewed By: dyi poolman 2 from Murrieta, Ca. ()
Pros: good shoping experience
Cons: none
Well Put together SITE WITH PARTS DIAGRAMS AND PHOTOS MAKES LOOKING FOR HARD TO FIND PARTS EASY TO FIND. Add in free shipping on a lot of the parts and this makes for a good deal.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Shelly from KS ()
Quick, easy and much more affordable than the local pool store. Would definitely order from inyopools.com again and would also recommend them to a friend.
Was this review helpful to you?
1 0
(5 out of 5 stars) weir bumper pad
Reviewed By: Bill C. from Bradenton, FL ()
Should you ever need a replacement this is the place to go...helpful and knowledgable personel and got just what I needed fast ...Highly recommend..A++++++++++
Was this review helpful to you?