$34.14
Part # 6654-0
Manufacturer Code 0101-15
3-Piece Gate Valve S x S. Valve may include an external lock.
Gate Valve, 3 pc, Magic Plastics, 1-1/2"s x 1-1/2"s, 100psi is discontinued.
The Gate Valve, UniBody, Magic, 1-1/2"s x 1-1/2"s, 100psi is the suggested replacement part# 6654M
The pull handle was up in the open position and was hit breaking the top cap of the valve housing. I noticed this valve has bolts, can I take the valve apart?
Reply
Hello Greg, concerning the Valve, Grid Push Pull 1 1/2in Eqbv (0101-15) part 6654-0, you cannot take this valve apart, it is sold as one whole unit.
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
I did not want to re-do my plumbing. I was happy to see that the main body of the valve was the same size as my old one. I removed the 4 screws holding it together, they were all rusty and broke while removing. Make sure you have the proper size wrenches as there is not much room for pliers or vice grips. Once I removed the bolts I was able to gently pry the plumbing back enough to remove the old valve main body. I cleaned up the area of excess debris and installed the new valve body into the same location. I used the new screws that came with the new valve. I snugged the bolts down a little at a time to make sure I didn't crack the plastic or strip the bolts. You can't tighten these a lot or you can break the plastic or the bolts. They only need to be snugged up. if it leaks when started you can always snug them a little more but I had no issue's. After install I started up the pump and I had no leaks. All was good.
The Most Helpful Review
1 0
(5 out of 5 stars) Nice valve for the price.
Reviewed By: Inyo Customer ()
New vale shipped fast and works perfect. I only used the center section as I didn't want o replace the plumbing and it fit great.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Louis D. from Pasadena, MD ()
Replacement for a broken valve. Fit perfectly.
Was this review helpful to you?