By Pentair Pool Products
Part # 3569-01
Manufacturer Code 78244200
Small SS Niche, 3/4" Rear Hub, Concrete - 78244200
Hi I would like to replace my 2 halogen pool light fixtures w/ LED fixtures. I have an in ground Vinyl liner Kafco pool. My Niche / Light combo reqs me to drain the pool to change the light because cable is too short. ph 770 863 3787
Niche Label says.
American Products Model 78243X & 78422X Fixture Housings (Concrete Pools & Spas) Model 78241X & 78242X Fixture Housings (Manufactured Pools & Spas)
Use with Models 771XXX, 773XXX, 781XXX, 785XXX, 786XXX, and 7878XX Wet Niche Light Fixtures
Reply
Hi Eric, You would require the Intellibrite LED Lights for use in your current light niche. If your light fixtures are roughly 10" diameter then you will need the Pool Light version and if the fixtures are 6" in diamter then you would require the spa version of the Intellibrite LED light.
Reply
My light niche is to for out of line causing me to slope the tile to it. Is there an alteration I can do to the niche or an over sized ring to cover the gap?
Reply
Hi George, Unfortunately, there is not a ring that will cover that gap.
Reply
Does Pentair sell just the copper ring from this niche?
Steve
Reply
Hi, Steve. The Copper Ring is not available as a separate part. You will have to use the CMP Inground Spa Light Adapter - 25549-540-000 as an alternate part.
Reply
Water appears to be leaking from the spa through the hole in rear where the electrical cable enters ... is there suppose to be a plug with the cord to prevent this from happening ... it caused the spa to drain significantly. Thanks.
Reply
Hi, Gary. The Cord Stopper will design to eliminate the issue that you're experiencing.
Reply
