1. Home
  2. Pool Parts
  3. Pool Pump Parts
  4. Jandy Stealth Original JHP & JHPU Series Pump (2002-2008)
  5. 5020-074

By Waterco

Details

Top

Part # 5020-074

Manufacturer Code R0555300

Dimensions 11" L x 10.5" W x 1.5" D

Alternate Part #'s R0555300, 35-295-1091, WPP6340661

Product Description

Pot Lid w/ Collar - R00555300

The original Jandy lid was discontinued. It is now replaced with a lid by Waterco. The lids are identical.

Top
Ask A Question

?     Asked on 6/9/2017by jay

Does part# R0555300 come with the o-ring?
 Reply

A  Answered on 6/10/2017 by InyoPools Product Specialist Lennox H.

Hi, Jay. The O-ring is included with this assembly.
 Reply


?     Asked on 5/13/2018by Sarah

Can I purchase just the o ring? I have the lid and it’s fine.
 Reply

A  Answered on 5/13/2018 by InyoPools Product Specialist Lennox H.

Hi, Sarah. Yes, the Lid O-ring - R0555400 can be purchased separately. 
 Reply


?     Asked on 6/3/2020by lesley

can I purchase just the clear lens frame is good
 Reply

A  Answered on 12/2/2020 by InyoPools Product Specialist Hector F.

Hi Lesley, unfortunately, this lid lens is not sold separately. 
 Reply


?     Asked on 1/24/2021by Ken Townsend

Air is leaking from the lid, I installed a new gasket lubed it up good, worked for a about 6 months but now leaking again. I took it apart and cleaned every thing re installed and still leaking. The pump is 03-04 could the lid be bad? or do i need a new gasket again? Do you have an oversized o ring?
 Reply

A  Answered on 1/27/2021 by InyoPools Product Specialist Hector F.

Hi Ken, if you are gearing air being pulled into the lid area then there could be a few possibilities. I would suggest inspecting the pot itself for any warp, or hairline cracks. Also the same for the lid itself. 
 Reply


?     Asked on 3/13/2022by Rick Lee

Does this lid fit a Model # SHPF 1.5 - 2 I'm sucking air, replaced O ring and have put silicone paste on it, it works for periods and then not. Can have this happen when gone for long periods Thanks. Rick L.

 Reply

A  Answered on 3/14/2022 by InyoPools Product Specialist Rich N.

Hi Rick, this will not fit your Jandy Stealth SHPF or SHPM Series Pump but this Lock Ring, Lid, & O-ring - R0445800 will be perfect.   As you know, be sure to clean the sealing surfaces and put some lubricant on them to help it seal perfectly and last a long time.  
 Reply