Part # 4600-2127
Manufacturer Code PF15-2127
Dimensions 18" X 7/16"
Tank O-ring 18" - PF15-2127
18" Nautilus® Tank O-Ring *AFTER 2001*
Q&A
O-ring, 18" Tank (pf15-2127) This is the generic O-ring to the original part number 152127. If you want the original manufacturer, please order the Nautilus Stainless Filter Tank O-Ring Original - 152127
Oops--wrong model no. on previous o-ring question. Pac-Fab Nautilus NSS-48 is correct model number. Sorry.
Reply
Hello Robert - This o-ring will fit the Pac-Fab Nautilus NS-48. We could not find a a filter model NSS-48.
Reply
Is this o-ring a wedge type ? My original is wider on one side and more narrow in the other....does that make sense??
Reply
Hello Joe - This o-ring has a round cross section. This replacement o-ring will work on the stainless steel Pac Fab Nautilus D.E., Sea Horse Cartridge, and 18" PF Sand Filter.
Reply
will this work on PF-50
Reply
Steve, For PF-50 Sand filter you'll need the 22" Tank O-Ring (PF15-2038-1).
Reply
Less than 1 hr
Socket Set
First I drained about half of the water from the tank. There is no need to drain it completely if you are only replacing the tank O-ring. I removed the band and carefully separated the two halves of the filter housing with a putty knife. If more water comes out at the seam just drain a little more until you can lift off the upper half of the tank. My old O-ring was hard and shaped like a wedge which was the reason it was leaking. I coated the new O-ring all around with silicone pool sealant. Do not skip this step. Next, I carefully placed the O-ring on the lower half of the filter housing. It looked slightly over-sized, and kept slipping into the tank as I lowered the top half down on it. It would have been easier with a helper, so keep that in mind. I kept tucking and shifting it until it was in place, even though one spot bulged out slightly. The band went around it easily and actually corrected the bulging area. I tightened the band to leave a gap of 1/4" between the bolt keepers. I decided not to strain the band any more than was necessary for a good seal. The new O-ring is going to be thicker than the old one after years of compression, so do not expect the band to tighten down as tight as before. I primed and started my pump and it did not leak one drop! Thank you Inyo Pools for a high quality replacement O-ring.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
No leaks now!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This was exactly what I needed.
Was this review helpful to you?
(5 out of 5 stars) good price
Reviewed By: Michael B. from poway, ca ()
Pros: perfect fit
Cons: none
exactly what I needed at 1/2 the price of the local shop
Was this review helpful to you?
(5 out of 5 stars) Fast Service, great prices
Reviewed By: Adirondack guy from Adirondacks, NY ()
Pros: Fast service, great price
Cons: none
I researched several sites for this 18" O-RING. Other sites were double the cost. The part arrived within a week. Great Service and excellent price!
Was this review helpful to you?
(5 out of 5 stars) O-Rings
Reviewed By: Bradford from Peoria AZ ()
Pros: value
Cons: none
Great value and fast Shipping.-------------------------------------- Thanks Inyopools
Was this review helpful to you?
(5 out of 5 stars) good stuff
Reviewed By: Ronnie S. from wrentham, MA ()
this peice fit perfect
Was this review helpful to you?
(5 out of 5 stars) yes,if they needed an o-ring this size
Reviewed By: William C. from San Antonio, TX ()
product is what I ordered. correct size. arrived timely
Was this review helpful to you?
(5 out of 5 stars) Just what I needed
Reviewed By: JieBurd from Wilmington, DE ()
Pros: Good quality, right fit
The perfect replacement for the stainless steel pentair filter.
Was this review helpful to you?