$8.06

Qty:

By Aladdin


Details

Top

Part # 4666-05

Manufacturer Code O-413

Dimensions 11-1/2" ID, 3/16"

Alternate Part #'s 0413, 47-0380-47-R, 47038047, 47038047R, O-413, O-413-2, O413, 90-423-5380, AEQO413, ALDO-413-0, APCO2245, SPG-601-1257

Product Description

Pool filter tank body o-ring commonly used on Jacuzzi brand filters including the Sherlock, Avalanche, and Landslide models.  Also fits the KD Pools CFR-50 and 50EF cartridge filters.

  • OUTSIDE DIAMETER: 11-3/4"
  • INSIDE DIAMETER: 11-3/8"
  • THICKNESS: 3/16"

Frequently Bought with O-rings

Magic Lube O-ring Lubricant

Top

?     Asked on 5/4/2015by tom

im trying to find a lid o ring.. for a sherlok 120..my parts id gives a sze of 11 1/2-11 7/8 x 3/16...which is bigger than the one you have....this model is 15 yrs old. can you help parts ref # 47-0380-47-R
 Reply

A  Answered on 5/4/2015 by InyoPools Product Specialist Lennox H.

Tom, This is the correct lid o-ring for the Jacuzzi Sherlock Cartridge Filter. The old o-ring can become stretched over time causing it to be enlarged.
 Reply


?     Asked on 5/5/2015by mike

I have a Jacuzzi platinum series filter...most of the markings worn off...I need an o-ring for the main tank body...is the part #7 in the schematic universal for Jacuzzi filters? ....thanks mike
 Reply

A  Answered on 5/6/2015 by InyoPools Product Specialist Brian M.

I can not say that the o-rings are universal.  I tried a couple of other site on-line and the " Jacuzzi Platinum series" all led me back to the Jacuzzi CFR & EF Cartridge. Please look at the parts breakdown and see if it resembles yours.  If it does, then part number 4666-05 will indeed be the part for you.
 Reply


?     Asked on 5/14/2015by Leo

I have a splash pak jacuzzi filter and I'm looking for a oring will part 7 on the diagram work the slash pak model # is 75ef-s1kr9-6-hk6 Please let me know Thankyou
 Reply

A  Answered on 5/14/2015 by InyoPools Product Specialist Patrick P.

Hi Leo, Yes this o-ring will work on the Jacuzzi Splash Pak 75ef-s1kr9-6-hk6 system.
 Reply


?     Asked on 6/6/2015by Tony

I have a Proline de filter. Dia is 12 inches. I am looking for the o ring that goes on top of filter before the dome goes on. I have tried a couple of o rings one was to thick the other to skinny. The skinny one is 3/16 by 8 inches. Is it leaking because I am streching the 8 in o ring? Would this one fit? . Model # 40DE-HK6-Namco. Part # is 94087871. Ser # 009946
 Reply

A  Answered on 6/6/2015 by InyoPools Product Specialist Patrick P.

Hi Tony, This would be the correct o-ring for your ProLine Model # 40DE-HK6-Namco, Part # is 94087871, you should have no issues with this o-ring. You may also see the Parts Breakdown For The DE40 Filter here.
 Reply


?     Asked on 6/18/2015by Inyo Visitor

I have a splash pak jacuzzi filter and I'm looking for a o-ring, will part 7 on the diagram work the slash pak model # is 100EF-S15KGT-9-6-HK6 Please let me know. Thank you
 Reply

A  Answered on 6/18/2015 by InyoPools Product Specialist Patrick P.

You would require this Jacuzzi 100EF O-ring.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Old O-ring had stretched out over time, making it difficult to remove/replace filter top

Written on 7/13/2023 by wampj

1. Remove old o-ring;
2. Install new o-ring

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Old o-ring wouldn't stop leaking under pressure.

Written on 6/21/2021 by Guest

Easy replacement for older stretched out o-ring. New one fits snug and properly, and finally no leaks. Not even an occasional drip!! Inyo Pools for parts replacement is the best!!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

Part was missing

Written on 10/13/2017 by Guest

Sent to me the next day great job

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.92  out of 5 stars)
34 Rating
5 star:
 
(31)
4 star:
 
(3)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews