$364.93
Part # 5223A
Warranty 1 Year
Manufacturer Code B796
Dimensions 15.5" L x 7.5" W x 5.5" D
**NOTE: NO LONGER AVAILABLE, REPLACE WITH P/N ST1152.**
CENTURY THREADED SHAFT, 56J FRAME ENERGY EFFICIENT E-PLUS CATALOG # B796 PART # 10-165122-06 ..... HORSEPOWER LABEL HORSEPOWER: 1 1/2 SERVICE FACTOR: 1.30 EFFECTIVE HORSEPOWER: 1.95 ..... DIMENSIONS LENGTH: 11 1/2" SHAFT LENGTH: 2 1/2" DIAMETER: 6 1/2" MOUNTING HOLES: (4) 5 7/8" CENTER TO CENTER ..... CAPACITOR RUN CAPACITOR, 50 MF, 370 VOLTS *CURRENT MODEL* MOUNTING ON TOP OF MOTOR (OPT# 5270-06) ..... ELECTRICAL VOLTAGE: 208-230/115 VOLTS SINGLE PHASE AMP DRAW: 8.7-7.8/15.6 8.7-7.8 AT 208-230 VOLTS, 15.6 AT 115 VOLTS. SHIPPING WEIGHT:
NOT California Title 20 Compliant.
California Title 20 Compliant Options:
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
I have a Magnetek SP1615-Z-1-BEP pump. I am considering replacing this pump with a two speed or a variable speed model. Is there a replacement motor with the same form factor that would mount to the existing impeller frame?
Reply
Here would be the 1.5 HP Replacement Dual Speed Motor for your SP1615-Z-1-BEP please note that the dual speed motor is wired 230V only.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This motor was an exact fit, and the wiring hook up diagram was very clear.
Was this review helpful to you?