Part # 4703-23
Manufacturer Code SPX714CA
Dimensions 5" L x 5" W x 4" D
PureLine® Replacement Diverter with Spider Gasket
Compatible with SP0714T-Style Multiport Valves
Comparable to SPX0714CA
The PureLine® Diverter and Spider Gasket assembly is an aftermarket replacement designed for use with multiport valves similar to the SP0714T model. If you're experiencing leaks from the backwash port, it’s often due to a worn-out spider gasket—this replacement diverter assembly solves that issue with a pre-glued 4-spoke gasket.
Key Features:
Includes diverter (key assembly) and integrated 4-spoke spider gasket
Gasket is permanently affixed and not sold separately
Designed for top-mount 1.5” multiport valves used on many sand filter systems
Commonly Used On:
Valves marked SP0714T
Top-mount sand filters with models:
S166T, S180T, S190T, S210T, S220T, S230T, S244T, S270T
Easy DIY Installation
No special tools required.
Watch our video: How to Replace a Diverter and Spider Gasket on a Multiport Valve
Included in Package:
Diverter (Key Assembly)
Pre-glued Spider Gasket
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only. This product is not manufactured, endorsed, or affiliated with Hayward® or any of its affiliated companies.
Easy Homeowner Installation
Watch our Video on How to Replace Your Hayward Diverter with Spider Gasket
How do you get the old key. Seal assembly out of the old shift handle housing
Th tension spring is very strong..once out how do you compress the spring to put new key seal & spring and pin back in? Any tricks on spring compression?
Jacuzzi 7 pos Diverter valve
Any replies would be helpful & appreciated. thank you
Reply
My handle broke of when I tried to move it. Is this the part that I need to put the handle back on?
Reply
Hi, If you have the SP0714T Valve and the handle is in good condition but the part that the handle is connect to is broken then yes. If the handle is broken then you will need to replace the Handle-SPX0710XF.
Reply
Less than 1 hr
Screwdriver, Hammer/Nail-set, Large Wood Clamps
4 0
1 - Remove Valve screws and pull out assembly.
2 - Use hammer and Nail set to knock pin out of handle releasing old Diverter
3 - Unless your spring is worn you may have difficulty putting it back together (I replaced with a fresh spring at the same time). I found it necessary to use two clamps to squeeze down the spring pulling the two parts together enough so I could then align the holes on the handle with the hole on the Diverter. This allowed me to put the pin through and tap it in place. Without clamps I am not sure how I would have done it (don't understand how other DIY stories skip this - without clamps or a friend not sure how I would have gotten it back together - without clamps it requires two hands to squeeze the two parts together evenly (I didn't do this initially and broke the part) and then a third hand to put the pin through).
4- Once re-assembled - screw back into place - make sure all gaskets are in place - and lube them if desired.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Worked well. I did have to have help compressing the spring to put it on. It’s quite strong. The video included on the website helped enormously.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Good quality. Easy to replace.
Was this review helpful to you?
(4 out of 5 stars) Fits good
Reviewed By: Inyo Customer ()
Fit as it should just have to get new o rings or reuse o rings from old diverter as the new one does not come with them
Was this review helpful to you?
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Didn't need, had to buy the whole unit.
Was this review helpful to you?
2 0
(5 out of 5 stars) Perfect fit
Reviewed By: Inyo Customer ()
Perfect fit, solved problem
Was this review helpful to you?
2 0
(5 out of 5 stars) It worked out good
Reviewed By: Inyo Customer ()
It worked out good
Was this review helpful to you?
3 0
(5 out of 5 stars) Very easy to replace
Reviewed By: Inyo Customer ()
Very easy to replace
Was this review helpful to you?
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit
Was this review helpful to you?
3 0
(5 out of 5 stars) Works great
Reviewed By: Michael M. ()
Easy to replace. Works great.
Was this review helpful to you?
2 0
(5 out of 5 stars) Diffuser
Reviewed By: Martin S. from Talladega, AL ()
Pros: Great Product
Cons: none
Product worked great. No issues. Used to repair some else's pool valve.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Cheryl F. from Alabama ()
Product arrived in a timely manner as described.
Was this review helpful to you?
(5 out of 5 stars) OEM Hayward filter part.
Reviewed By: Crawdaddy12855 from Northeast Geargia ()
Pros: Exact fit.
Superb and knowledgeable customer service. Prompt delivery.
Was this review helpful to you?
0 1
(5 out of 5 stars) Hayward Filter Part
Reviewed By: Toni T. from Brentwood, NY ()
Pros: Fast delivery
Cons: none
The part was perfect and delivered right away. The price was awesome! Everyone else wanted $10-$15 more for the same part. Thank you Inyopools.com! Im so glad I found you! I will recommend you guys to everyone I know!
Was this review helpful to you?
1 2
(4 out of 5 stars)
Reviewed By: Haun H. from strawberry plains, TN ()
great product, but it took much longer to receive it than I had planned. Ordered it on a Thursday afternoon with 2 day delivery before 4th of July weekend. I received it the following Wednesday afternoon.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: John T. from ocala, FL ()
Exact Replacement product. Very easy to install.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great replacement part at a great price!
Reviewed By: Amy D. from Fairdale, KY ()
Pros: Great price / fast shipping
Cons: None
I tried 3 pool stores in my area trying to find a replacement key/seal assembly for my pump valve but they didn't have it in stock. They could order it for me but it was almost three times the price I paid at INYO Pools WITH 2day shipping AND the local shops couldn't guarantee they would have it on their trucks for at least two weeks. I ordered on a Friday evening with INYO and got it on Tuesday morning :)
Was this review helpful to you?
(2 out of 5 stars) missing o-ring washers
Reviewed By: Alan A. from Rochester, NY ()
Pros: reasonable price received fast
Cons: missing o-ring washers
missing o-ring washers
Was this review helpful to you?
5 2
(5 out of 5 stars) great part
Reviewed By: Jonathan M. from jacksonville NC ()
this part is a perfect fit, as been all parts for inyopool.com easy to replace after removing all bolts and handle just simply push assembly out the bottom and replace the 2 o-rings and backup ring, simple
Was this review helpful to you?
(5 out of 5 stars) Hayward replacement diffuser
Reviewed By: clinpc from Bridgeport, CT. ()
very satisfied with product
Was this review helpful to you?