Part # 5074-09B
Manufacturer Code 357102
Dimensions 8" X 0.15"
OEM volute gasket used on the Pentair IntelliFlo-VF, IntelliFlo-VS + SVRS, IntelliFlo-VS 3050, Triton Whisperflo pumps.
This molded gasket was introduced with the re-design of the seal plate in June 1994.
Which direction does the rounded edge of the gasket face; the grove or the flat face of the wisperflow filter?
Reply
Hello Walt, the rounded edge faces out, the flat part goes into your seal plate, make sure the groove (rounded edge is facing out) that will seal into your housing section.
Reply
1 to 2 hrs
Screwdriver, Socket Set, Scraper
2 0
Where the pump motor mounts to the pump housing,was leaking. The last pool guy tried silicone. Didn’t work. So a 9/16 socket and ratchet. A scraper. Took the thing apart. Lubed up the oring groove to hold the new oring in place. Push the motor back to the pump housing and evenly side to side tightened up all the bolt. Worked like a champ. INYO pools were the only pool supply company to carry the parts I needed.
The Most Helpful Review
1 0
(4 out of 5 stars) Seal Plate Gasket
Reviewed By: Phillip H. from Madison, AL ()
Pros: Flat side goes toward Seal Plate.
Cons: Little smaller so it constantly pops out of groove until fully tightened.
The gasket is a bit of a chor to put on. I recommend Vasoline and two butter knives. Install the gasket, the mount the plate loosely. Gradually tighten bolts but use the butter knives to ensure the gasket is seating properly and not being pinched. Continue tightening until all surfaces are mated. Did not have any leaks and went on first time.
Was this review helpful to you?
The Most Recent Reviews
(4 out of 5 stars) Stop the leaking.
Reviewed By: Inyo Customer ()
Just what I needed and at a great price.
Was this review helpful to you?
(5 out of 5 stars) Quality Product,Fast Delivery
Reviewed By: Phil H. from Palm Coast Fl ()
Great product, fast delivery over the holidays. Exact fit to my 13 year old pool parts. Always the right part at the right price. I always get the fastest service as well as the best price with Inyo Pools.
Was this review helpful to you?
(5 out of 5 stars) Reliable seal
Reviewed By: poolcp ()
Fair price... high quality.... INYO is a company that I count on for all of my pool products.
Was this review helpful to you?
(5 out of 5 stars) Cleaner pumper bearing and gasket.
Reviewed By: rdalepenn from Garland, TX ()
Pros: good fit and quality
Cons: none
Bearing and gasket were correct replacements for orininals and were of good quality and shipped quickly.
Was this review helpful to you?