Part # 3237-101
Manufacturer Code W70328
Dimensions 6.25" L x 2.25" W x 4.75" D
FOOT FLANGE G3 (W69732)
Trying to install the new foot. How do I remove the foot flange? Regarding a Baracuda 3.
Reply
Good Day Ken. I wish I could say there was an easy way to replace the foot flange on a barracuda G3. I have yet to find one, if there is. The way I have done it is to break the cleaner down completely. In the OWNER'S MANUAL, on the last page, it shows the cleaner in pieces. This is the easiest way to remove the foot flange. Putting it back is easier. You re-assemble the cleaner and snap the flange back in at the end.
Reply
i cannot find any reference numbers on my present foot flange. i can i insure that the flange i am ordering is the correct one.
Reply
Hello Sparky, This foot flange will fit the Zodiac Barracuda G3 pool cleaner. You can always send in pictures of the pool cleaner if you would like to verify that the part you are interested in is the correct part. You can email us the photos at: upload@inyopools.com.
Reply
HOW DO YOU REMOVE OART AND REINSTALL NEW PART?
Reply
Jorge, I wish I could say there was an easy way to replace the foot flange on a barracuda G3. I have yet to find one, if there is. The way I have done it is to break the cleaner down completely. In the OWNER'S MANUAL, on the last page, it shows the cleaner in pieces. This is the easiest way to remove the foot flange. Putting it back is easier. You re-assemble the cleaner and snap the flange back in at the end.
Reply
Hi, my g3 is old but still kicking. while i have replaced other parts, the common ones, is it ever necessary to replace the foot flange? the reason i ask is that it keeps falling out of the main body. It looks like the one above and i don't see anything worn off of it. This just started happening recently. Yes i have the wide end with the thing that sticks out inserted into the hole made for it. Its the little end with the 1/2" thing that sticks up that won't stay in. thanks.
Reply
Hi Ginger, yes it is necessary to replace the foot flange, and the issues you are experiencing is exactly why. Also, the nubs on the foot flange that have contact with the pool surface will wear down. Once the nubs on the flange are considerably worn, then I would recommend replacement.
Reply
will this part fit a g2 zodiac barracuda also?
Reply
Hello Reta, unfortunately, this is not compatible with the Zodiac G2 cleaner. You would need to get the body assembly manufacturer part number W70465 which we do not carry, unfortunately.
Reply
The Most Recent Reviews
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Works Great! The first one that was sent to me was the wrong part but customer care took care of it fast , no problems!!
Was this review helpful to you?
(5 out of 5 stars) Excellent...So far.
Reviewed By: Vince J. from Orlando, FL ()
Pros: Delivery was free and fast. Part is working GREAT. Wish I had replaced all these parts months ago.
Cons: NONE. Just hope they hold up.
I finally had to buy new parts after gluing and epoxy repairing. I bought this with the other piece and they work fine along with the diaphragm I bought late last year.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Greg S. from Hesperia, CA ()
Pros: Easy to install
Better than original. My G3 was about 6 years old the original part was thinner in some areas and appeared to be made from different plastic.
Was this review helpful to you?
(5 out of 5 stars) GOOD FLANGE WORKS RIGHT DOES GOOD JOB
Reviewed By: DON BACK YARD POOL from BAKERSFIELD, CA ()
Pros: WORKS GREAT DOES WHAT IT SHOULD DO
Cons: NONE
DOES THE RIGHT JOB GREAT PIECE WAS EASY TO PUT BACK ON VAC. AND IT WENT RIGHT TO WORK, VAC IS WORKING LIKE NEW AGAIN... GREAT ITEM...
Was this review helpful to you?