1. Home
  2. Pool Parts
  3. Filter Parts
  4. Hayward S-200/ S-240 Sand Filter
  5. 4800-24

$31.14

Qty:
 ADD TO CART

By Hayward Pool Products

Details

Top

Part # 4800-24

Manufacturer Code SX200D

Dimensions 3-1/8" x 2-3/4"

Alternate Part #'s 31-150-1510, HAY-051-2188, HAY0512188, HAYSX200D, S-200-D, SX200D, HPPSX200D

Product Description

Bulkhead Fitting for Hayward S200 & S240 - 2 Required (sx200d)

Top
Ask A Question

?     Asked on 8/18/2016by Joe

What size wrench is needed to remove the bulk head fitting of the Hayward S200 pool filter?
 Reply

A  Answered on 8/19/2016 by InyoPools Product Specialist Joe S.

You would want to us a common pair of CHANNELLOCK INC. 16-in Tongue and Groove Pliers
 Reply


?     Asked on 6/13/2017by Mike

Just purchased Fitting, bulkhead 4800-24 is it necessary to remove the sand from the filter before installation.
 Reply

A  Answered on 6/15/2017 by InyoPools Product Specialist Megan C.

Hi, Mike. You will need to remove the sand in order to replace this fitting.
 Reply

  • Commented on 6/9/2020 by Product Owner

    Why can't I remove/replace the bulkhead fitting without removing the sand?
     Reply


?     Asked on 6/29/2018by Inyo Visitor

is there a difference between this and the DE360f bulkhead fitting?
 Reply

A  Answered on 6/29/2018 by InyoPools Product Specialist Lennox H.

Hi. There is a difference between those parts because they're not interchangeable. 
 Reply


?     Asked on 4/12/2023by David Zinger

Does this bulkhead fitting come with an 'O'ring If not, what is the part number for the 'O' ring Thanks
 Reply

A  Answered on 4/12/2023 by InyoPools Product Specialist Hector F.

Hello David, the o ring for these bulkhead fittings is part number 4800-23 and they unfortunately do not come with the fitting. 
 Reply


Top
Write A DIY Story
Difficulty

Est. Repair Time

More than 8 hrs

Tools Needed

Pliers, 16” channel locks. Taking the bulkhead to hardware store to purchase a box end wrench that fits it.

Cracked elbow

Written on 6/27/2020 by Guest

You’re going to want to remove all the sand and loosen the nuts that that attach your multi port valve. I replaced the upper elbow and am going to have to back up and punt. The lower piece attaching to the multi port needs to be removed in order to replace the upper elbow. There is no work around.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
(100%) 1 of 1 customers would recommend this product to a friend.
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review