$577.99
By Hayward Pool Products
I am looking for a top with vent and pressure gauge for a Hayward CX17502. What would be the part numbers?
Reply
Hello William - The part number for the CX17502/C1750 lid is CX1750B (4663-06C). The part number for the gauge is 4727-0.
Reply
The fitting on top of the housing that tightens down the filter is leaking. I need a new O ring or whatever it is to stop the leak. Do you sell parts to repair that or do I need to replace the hole upper housing of the filter? What part(s) do I need and how much are they?
Reply
Hi, Charles. You can first try replacing the Filter Head O-ring (CX900F) to see if that will stop the leak. If that solution doesn't work then at that point would strongly recommend closely inspecting the head and body of the filter to find out what's causing the filter to leak.
Reply
The filter top keeps popping off. We replaced the steel rod and it continues to come out of the threading at the bottom unit. Is this a common solution to this problem? Also, how would I detatch the fittings from the old unit and re-attach to the new unit?
Reply
Hi, Dawn. Check the threads of the bottom to see those are stripped. You will have to cut the plumbing to remove the old filter so that you can install the new one.
Reply
