Part # 4628-21
Manufacturer Code 39262605K
INYO # 4628-21 JACUZZI #39262605K
Jacuzzi DVK-7 valve cover kit includes a complete key, cover and handle assembly. This kit will fit both the bolt-on and clamp-on versions of the DVK-7.
The DVK-7 valve is used on a number of Jacuzzi sand filters including the Sand Trap, Laser, and MFM mdoels.
Parts Included:
Our inground pool has a Jacuzzi sand filter (Model #DV Assy 7-Pos 1 1/2NPT)(Order #39263009) which is dated 2000.
I have a very small leak coming from the 7 position handle. No other leaks around the piping, of where the bolts attach to the head and tank.
Do you recommend a complete gasket rebuild kit to fix the leak? Do you carry?
Or do you recommend a complete head ass'y replacement. Do this unit that you carry replace my older Jacuzzi 39-2630-09 head?
Reply
I would suggest the complete cover kit here for the Jacuzzi 7 way valve http://www.inyopools.com/Products/07501352015807.htm as there are so many parts within in the top half of the valve which could be causing your leak. You may view the cover kit (Key D) as well as all the other parts of your valve here http://www.inyopools.com/pool_parts_7_way_dial.aspx
Reply
I need to replace my original Jacuzzi 7-way filter valve, would installing the 39262605RKIT require any changes to my existing plumbing. Are the plumbing ports in the same exact positions as the original?
Reply
Just purchased a DVK7 complete cover kit, but it came without any instructions for installing. Are there any instructions available?
Reply
Hello Carol - The installation of this assembly is not difficult. All you need to do is remove the 6 bolts from the old assembly and lift the top off of the valve. Place the new top assembly on the valve body and tighten the bolts.
Reply
I have the Jacuzzi 7port Model 39263009 DV Assembly that fits on a 225L. Currently leaks. What is the correct replacement model. Is it the 39262605rkit ?
Reply
Hi Larry, Yes this 39262605rkit would be the correct replacement for your Jacuzzi 39263009 valve. This item is the top half of the valve only but 99% of the time the issue with leaking is in the top half of the valve. By just replacing the top half of the valve you don't have the headache of getting involved with the plumbing.
Reply
Less than 1 hr
Screwdriver, Wrench Set
Installed kit 14 March, yesterday. Even with no included instructions, the install was a no brainer (very easy). When pump activated and primed, ran for a while then shut off, prime held. The fault was with the grit and gravel bits that sloppy installers left in the system. The dial control could not seal properly.
Less than 1 hr
Screwdriver, Socket Set
Less than 1 hr
Screwdriver
Less than 1 hr
Screwdriver, Wrench Set
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
It fits the same at the jandy multi that they discontinued.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Part was exactly what I needed. Great online customer service.
Was this review helpful to you?
(5 out of 5 stars) So simple to replace!
Reviewed By: Inyo Customer ()
So simple to replace! Even a pool novice can handle this one. If you can operate a screwdriver you can replace this part!
Was this review helpful to you?
(5 out of 5 stars) Super fast delivery, faster installation, reasonable price, high quality
Reviewed By: Chuck from Harleysville PA ()
Pros: Super easy install
Cons: Not purchasing sooner :)
If your Jacuzzi/Carvin Dvk7 valve is leaking from the top handle assembly,this is the perfect part for you. It bypasses all of the plumbing efforts required of including a new valve body. This is really the guts of the unit so save yourself the time and money. A total of 10 minutes to swap out the old one which included rounding up a phillips screwdriver and 7/16" wrench.
Was this review helpful to you?
2 0
(5 out of 5 stars) This is the part for you!
Reviewed By: Chuck from Harleysville, PA ()
Pros: Super fast delivery, faster installation, reasonable price, high quality
Cons: NA
If your Jacuzzi/Carvin Dvk7 valve is leaking from the top handle assembly,this is the perfect part for you. It bypasses all of the plumbing efforts required of including a new valve body. This is really the guts of the unit so save yourself the time and money. A total of 10 minutes to swap out the old one which included rounding up a phillips screwdriver and 7/16" wrench.
Was this review helpful to you?
1 0
(5 out of 5 stars) Inexpensive repair
Reviewed By: Kurtis H. from Mary Esther, FL ()
Plug and play! New pressure gage was nice bonus!
Was this review helpful to you?
(5 out of 5 stars) Valve replacement kit
Reviewed By: Lind G. ()
My valve handle broke and I could not get the pin out. Couldn't get a replacement valve (delivery was weeks because Jacuzzi was out of business). This kit allowed me to change the guts out on the valve and get back in business within 15 minutes. Solved a big problem for me because I couldn't backwash my filter w/o the handle.
Was this review helpful to you?
2 0
(5 out of 5 stars) Exactly what I needed to get my pool wooking again
Reviewed By: Ray W. ()
Pros: easy install with no worry about getting the gasket or spring installed correctly..
Cons: None
Wasn't sure if I needed just the spring or gasket but after talking to a inyopools rep I decided to just get the complete cover kit. I'm glad i took his advice. The spring and gasket came installed and it only took 5 minutes and we were back in business.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Joel F. from Hartford, WI ()
Pros: Perfect mactching parts replacement
Cons: none
The parts ordered matched up perfectly and the job was completed in 30 minutes- Thanks again for all your help! HIGHLY RECOMENDED!
Was this review helpful to you?
(5 out of 5 stars) cOMPLETE COVER KIT
Reviewed By: Jo-Ann B. from milford, MA ()
THE SERVICE WAS EXCELLENT SHIPPING TIME WAS GREAT AND THE PRODUCT WAS EXACTLY WHAT WE ORDERED IT IT WORKED GREAT ALL SUMMER
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Mark S. from Bay City, MI ()
The spring on the diverter was not as strong as the previous one...Sometimes it's rather difficult to seat and not have it drip...I have brand new sand in it...
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Amy K. from New England ()
Perfect fit! The local pool supply store said they couldn't help me since the parts were discontinued. This is exactly what I needed and it arrived quickly. Thanks.
Was this review helpful to you?
(5 out of 5 stars) 5 stars!!!
Reviewed By: James W D. from New Richmond, OH ()
great item, fit right onto our Jacuzzi Filter without any problems
Was this review helpful to you?