Part # 4040-03
Manufacturer Code SPX1082F
Dimensions 10" L x 10.5" W x 4.5" D
COLLAR, ADJUSTING FOR SQUARE
Are there any dimensions shown? Size of square? Length of collar and diameter of collar?
Reply
Hello Craig. I called Hayward Tech Support ( 908-355-7995 ) and they found the technical drawings. I found out that the square is 10.5" , the height of the collar portion is 1.7" ( from the base of the square it is 2.75" ) and the diameter of the collar is 8.76". I hope this in the information you were needing.
Reply
How does this collar adjust? I need more depth/height - I need it longer if you know what I mean
Reply
How much more depth do you need?
Reply
It adjusted up and down in the skimmer throat
Reply
If you need more length you would need to take a second collar and cut the top off to the additional length you need, place cut piece into top opening and drop second one in place Caulk seams with underwater magic. Sealant, Underwater Magic Mosaic, 4.2 oz Tube, White Horizon # 88-867-1020
Reply
The bottom of my skimmer lid reads model SP-1082,SP-1084 is this the right part? Also I need the top of the skimmer to come up 3 3/8 inches will one be enough.
Reply
Hi Ben, What you need for an extension collar for this skimmer is the SPX1084P1 http://www.inyopools.com/Products/07501352014617.htm
Reply
Yes, this would be the correct replacement part.
Reply
YES IT IS THE RIGHT PART. SKIMMER SP1082 TAKES A SPX1082E SKIMMER COVER SQUARE IT IS AVAILABLE IN SEVERAL DIFFERENT COLORS
Reply
Hi Ben, What you need for an extension collar for this skimmer is the SPX1084P1 http://www.inyopools.com/Products/07501352014617.htm
Reply
Yes, this will be correct but you may also nee SP1084P1 ( 51-150-1659 which is the round collar portion )
Reply
what extension collar do I need for a sp1084 skimmer ?
Reply
If the SP1084 skimmer has a square lid, the collar is part number 4040-03 (SPX1082F). If the SP1084 has a round lid, the collar is part number 4040-20 (SPX1084P).
Reply
