Part # 4655-03D
Manufacturer Code 25357-982-00
This is an After-Market Air Relief Manual Valve Assembly manufactured by C.M.P Pool Products which is a direct replacement for the Pentair Relief Manual Valve Assembly and is used on various Pentair, American Products and Pac Fab filters including the Sandpiper, Clean & Clear, Clean & Clear Plus, Predator and FNS Plus. The assembly includes the following parts:
Click to view Pentair Air Relief Assembly for Pool Filters, Includes Pressure Gauge - 98209800
Can I install this myself?
Reply
The Air Relief Assembly can be installed by a homeowner. It requires that you unthread the old one, wrap some teflon tape around the threads of the new valve, and thread it back into place.
Reply
Will this valve assembly work on an Aquatec FN/FNS-48 filter?
Reply
My relief valve is dripping. I have a Purex-Triton Filter model #CC100..
Design flow=100 g.p.m. and 6.5 psi residential. There is a pin number on the tank housing =178555..Do I need to purchase the entire relief valve OR the very small "O" rings inside the valve? I have had this unit since 2000. I do not know if this assembly 998209800 is the correct fit But it sure looks like it! Thanks
Reply
Hi Charlie, This would be the correct air relief for the Purex-Triton Clean & Clear CC100 filter. For the CC100 filter I do not show where the small o-ring is sold separately so I would suggest the entire air relief.
Reply
Less than 1 hr
None
Less than 1 hr
None
1 0
Less than 1 hr
Adjustable Wrench
3 0
This was a very easy replacement, and the cheapest replacement I found! We just turned off the breakers, released the air from the air relief valve. We were replacing filter cartridges too, so we took the top off the filter. Unscrewed and removed the old air relief valve, and replaced it with the new one on. We then put some Teflon tape on the screw head of the air pressure gauge, screwed it on hand tight, then used a wrench to tighten it...voila! No more leaks and working very well!
Less than 1 hr
Adjustable Wrench, Teflon Tape
1 0
Very simple. All one needs is teflon tape and an adjustable wrench. Functions well. Pay particular attention to the orientation of both the gauge (readable location) and the outlet (it will fire water all over that direction) as it is tightened.
Less than 1 hr
Adjustable Wrench, Pipe Tape
1 0
I turned the pump off
Released the pressure
Took old assembly off using wrench
Pipe taped the pressure gauge, and assembled it with the relief valve
Pipe taped the nipple and assembled it with my filter
The Most Recent Reviews
(5 out of 5 stars) perfect replacement
Reviewed By: Inyo Customer ()
I broke off old one accidentally, this was replaced in about 2 minutes
Was this review helpful to you?
1 0
(5 out of 5 stars) Excellent Spare Part
Reviewed By: Inyo Customer ()
Installed easily, functions well, good install and operation documentation.
Was this review helpful to you?
1 0
(5 out of 5 stars) Easy Install
Reviewed By: Inyo Customer ()
Works perfectly. Had ordered one previously from a different place and it didn't fit. This one was easy to install and fits perfect.
Was this review helpful to you?
1 0
(5 out of 5 stars) Replacement parts
Reviewed By: Inyo Customer ()
Replacement parts for Pentair Filter
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Don K. from Irving, Tx. ()
Mainly got this product to be able to read the gauge easier. Works very well , easier to see from a distance ...
Was this review helpful to you?
1 0
(5 out of 5 stars) Air Relief Manual Valve Assembly (98209800)
Reviewed By: Willian F R. from Woodbridge VA ()
Pros: Great value
Cons: None
Great experience: rapid delivery, reasonable price, great instructions and easy to install.
Was this review helpful to you?
1 0
(5 out of 5 stars) Upgrade to my old Relief Valve and Pressure Gauge
Reviewed By: Adam O. from Houston, TX ()
Pros: Easy to install, clear reading on the pressure gauge
The old equipment that I inherited was, well, old and useless. I needed an upgrade and these parts have exceeded my expectations.
Was this review helpful to you?
(5 out of 5 stars) Air Relief Valve exactly what was required
Reviewed By: James N. from Hudson, NH ()
Pros: Excellent value
Cons: Need to supply your own teflon tape
This kit is excellent as it includes the gauge and the valve. Simple to install. Excellent value.
Was this review helpful to you?
(5 out of 5 stars) Replacement Pool Valve/Gauge
Reviewed By: Matt H. from PA ()
Pros: Works great.
Cons: None
Exact replacement for my pool filter. Easy to install.
Was this review helpful to you?
(3 out of 5 stars) Tricky installation
Reviewed By: Spike ()
Very tricky to screw on the presure gauge to the relief valve assembly. It kept on screwing on crooked and then leaking a lot after turning on the pump. Only after using a lot of pressure while screwing it on could I get it straight. It still leaks a bit, but will probably stop after a while. I should have returned it. Are they all that way or was this one defective?
Was this review helpful to you?
(5 out of 5 stars) as advertised
Reviewed By: Mark Z. from Richmond. TX ()
Pros: One of One replacement
Cons: none
One for one replacement. The guage is included and has a handy filter status on the outer ring.
Was this review helpful to you?
(5 out of 5 stars) Original Parts
Reviewed By: Suzanne S. from Sterling Heights, MI ()
Pros: original equipment
Cons: easy to crack the valve.
The exact replacement for the pressure relief valve and gauge, they fit perfectly. Be careful not to over-tighten the gauge, however as cracking the valve cowl is easy to do. A turn of Teflon tape insures leak-free operation.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Mike M. from Titusville, FL ()
Pros: works fine
Cons: none
great product!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Robert L. from Exeter, CA ()
fast and accruate
Was this review helpful to you?
(5 out of 5 stars) Great Gauge No Leaks
Reviewed By: John P. from Orlando, FL ()
Works well, no issues. Great shipping.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Linda A. from Bensalem, PA ()
Good product. worked well on my pool pump.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Rodney M. from Gilbert, AZ ()
easy to install, works great. has every part to make a total install.
Was this review helpful to you?
(4 out of 5 stars) easy replacement part
Reviewed By: Babs1026 from Nottingham, MD ()
The Air Relief Valve arrived quickly and was very easy to assemble and place on the filter tank. The person I dealt with in the customer service dept was very helpful taking extra time to verify that this unit was sold with the pressure gauge and the air relief part. I installed it in under 5 mins. I had purchased separately, from a local hardward store, the recommended teflon tape to wrap around the nipple of the pressure gauge before you screw that onto the air relief part, very simple repair!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Steve U. from Albuquerque, NM ()
Pros: good quality materials and crafstmanship.
Cons: none
Items were exactly as described and was shipped on time as promised.
Was this review helpful to you?
(5 out of 5 stars) great replacement parts
Reviewed By: Doug B. from Rancho Palos Verdes, CA ()
Pros: easy to intstal
Cons: none
these parts were better the originals.
Was this review helpful to you?
(5 out of 5 stars) Good product good price
Reviewed By: Jon B. from San Diego, CA ()
Product arrived very quickly and installed in a few minutes. Came with factory instruction booklet.
Was this review helpful to you?
(5 out of 5 stars) Great Air relief valve
Reviewed By: DANNY R. from MILFORD, DE ()
Easy to put on. Have experienced no problems with this valve.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Greg from PA ()
Pros: Price, shipped quickly
Cons: none
Found the whole assembly at INYO pools where other sites you had to order each part seperately. Installed it the day it arrived and is working fine.
Was this review helpful to you?
(5 out of 5 stars) FILTER PRESSURE GAUGE
Reviewed By: Robert S. from Arnold, MD ()
Pros: FIT PERFECT
Cons: NONE
HARD TO FIND SINCE MY FILTER COMPANY WAS NOW OWNED BY ANOTHER COMPANY,BUT INYO HAD ALL THE PARTS
Was this review helpful to you?
(5 out of 5 stars) Good gage to help remind you to clean filters.
Reviewed By: TMac from New Harmony, UT ()
Pros: Works great
Was this review helpful to you?
(5 out of 5 stars) built with quality in mind.
Reviewed By: bill from Indiantown, FL ()
Pros: overall high quality
Cons: none
much nicer than the original.
Was this review helpful to you?
(5 out of 5 stars) New is always better!!
Reviewed By: Susan M. from Monroe, LA ()
Pros: Good price
Cons: None
Rec'd part on time and in great condition. We have already replaced the old part with this one and all is working great!
Was this review helpful to you?
(5 out of 5 stars) Great Value
Reviewed By: Enrique M. from El Paso, TX ()
Have priced this product at several places and found it priced here very reasonably. Works great......
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Harold G. from Hudson, FL ()
Came on time and works great.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Kevin K. from North Richland Hills, TX ()
Great price and good quality
Was this review helpful to you?
(5 out of 5 stars) Original equipment replacement parts
Reviewed By: Valerie G. from New Orleans, LA ()
Pros: Parts fit perfectly!
Cons: Had to wait for second shipment.
Order entry was easy, however I did not receive the orginal order for these items. Some kind of mix up by the supplier. Did receive the second shipment with all the items and instructions. Thank you Sharon!!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Rich P. from castleton , ny ()
Pros: service, quality, price
Cons: none
needed the part ,got it quick,( the correct one) and at a great price.
Was this review helpful to you?
(5 out of 5 stars) Clean and Clear Relief Valve and Gauge
Reviewed By: Edward G. from charlotte, nc ()
Cons: instructions really not all that clear
The product arrived in perfect condition, on time and fit perfect
Was this review helpful to you?
5 0
(3 out of 5 stars) Replacement for Pentair Pool Filter Relief Valve
Reviewed By: DynaWg from Pleasanton, CA ()
Pros: Quick and easy to install
Cons: Leaks if closed tightly
This is a repalcement the original valve (<4 yrs. old)that eventually began leaking do to a crack at the base where the gauge was threaded. This product was easy to replace, reasonably priced and arrived in a timely manner from INYO. The only problem with this particular valve is that if twisted closed too tightly leaked. I found that you don't need to twist it closed too tightly. Just twist until until it stops (you may need to back off just a little) to ensure it is closed all the way. We will see how long this part lasts.
Was this review helpful to you?