By Hayward Pool Products
Part # 6220-105
Manufacturer Code IDXAPS1930
Dimensions 3.5" L x 2.75" W x 2.5" D
Air Pressure Switch, H-series A. Ground (idxaps1930)
I have a H100ID hayward pool heater that will not ignite. The fan comes on. I ma not getting a voltage read from the terminal going from air pressure switch to the ignition module. Can i bypass the switch just to confirm it needs replaced?
Reply
Hello, We recommend contacting the manufacturer with that question. You can reach them at 1-800-429-9273
Reply
contact 1-888-Hayward
Reply
the normal testing procedure would be to use a jumper to bypass the switch to verify that it is bad. But ony to do that and not as normal operation
Reply
yes, briefly
Reply
