By Waterway
Model # SD-10-1-N
Waterway Hi-Flo 1HP Single Speed Above Ground Pool Pump – SD-10-1-N
The Waterway Hi-Flo pump is a powerful and efficient choice for above ground pool owners seeking reliable performance and quiet operation. The SD-10-1-N model features a .95HP single speed motor.
Designed for plug-and-play convenience, this pump includes a standard 3-prong 3’ NEMA cord and runs on 115 volts, making installation simple for most above ground setups. The wet end is rotatable to a horizontal position, offering flexibility to fit tight equipment pads or unusual plumbing configurations.
Key Features:
.95HP motor for strong performance
115V with 3’ NEMA plug for quick installation
Durable, corrosion-resistant construction
Rotatable wet end for customizable plumbing alignment
Ideal for most above ground pools, the Waterway Hi-Flo SD-10-1-N combines performance, versatility, and value to keep your pool water clear and clean all season long.
How many hours per day should I run my pump?
Reply
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
Reply
What is the flow rate of this pump (.95 and 1hp versions)? Is it compatible with 2" hoses?
Reply
While they don’t specify exact gallons‑per‑minute (GPM), a 0.95 THP / 1 SPL (standard horsepower) pump typically delivers: ~ 60–75 GPM under normal conditions with clean filter and 1½″ plumbing. Yes, the SD‑10‑1‑N is designed to work with 2″ hoses on the discharge side. The suction side is a standard 1½″ union and the discharge has2″ union threads.
Reply
