Part # PL0172
Dimensions 25" L x 9" W x 5" D
Time to Replace Your DE Grids?
Our DE Grids are used on the most common pool filters including American Products®, Pentair®, Hayward® & Pac-Fab®. Most DE Filters will require 7 Full Grids and 1 Partial Grid. Typically DE grids last about 5 years so if it has been longer than 5 years then now is the time to replace your DE grids.
Things to Consider When Replacing Your DE Grids
Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
How do I know which replacement grids I should order?
Reply
Typically, the filter label will contain the filter model and square footage of your grids. If the information on the label can not be read, you can measure the length (top to bottom) of the grid and multiply by 2 to get the square footage. For example: A 12" grid length would mean that the square footage is 24.
Reply
What is the procedure for replacing DE grids? 48 sf
Reply
Sal- Here is a how-to guide that shows you how to replace DE filter grids. http://www.inyopools.com/HowToPage/how_to_replace_de_filter_grids.aspx
Reply
2 to 4 hrs
Screwdriver, Socket Set, Adjustable Wrench
Shut off electric to pool pump and filter. Relieved air from filter at top of filter. Remove water drain plug at lower back of filter to drain water. Removed band around filter. Take top of filter off. Remove filters from casing of DE filter. Remove top that holds DE filters in place. Remove one filter at a time and replace with new cartridge filter. Put top on that holds filters in place. Put assembly of filter cartridges back into housing. Connect housing with band around filter housing. Replace drain plug. Turn electric on and let filter fill up. Open air valve to let air escape. Add DE filter media to pool. Check for water leaks on filter.
1 to 2 hrs
Wrench Set, Adjustable Wrench
1 0
This is the same procedure for installing the other 7 grids, I'm repeating it here for completeness.
After opening the air relief valve to remove the pressure from the tank, I removed the tank cover. Then I took the grid assembly out of the tank. I disassembled the unit by removing the 5/16" locking nut from the top while holding the 7/16" nut at the bottom with an adjustable wrench. After disposing the old grids and hosing down the residual de from the other parts, with the aid of a video from YouTube, I reassembled the grids in the upright position using a grid guide costing $15 from a local retail store that really made it easy to attach the manifold. Reinstall the locking nut and place the complete grid assembly back into the tank. The whole process was fairly straight forward but took some patience. Most important thing is to replace each grid in the proper order. Total time spent about two hours.
The Most Recent Reviews
(5 out of 5 stars) Thank you
Reviewed By: Inyo Customer ()
Perfect fit and the video was simple and answered all my questions.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great support. Fast delivery and outstanding product!!!
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Gary B. ()
Actually purchased the entire set of grids - found that 5 of the old grids were also torn/leaking the DE on the bottoms so now I have a spare grid. lineThey work like a charm-re-charged the filter with DE and they are filtering just fine-no leaking of DE back in the pool (that was the first sign that I needed new ones-nothing like adding DE and seeing it come roaring out of the return lines
Was this review helpful to you?
1 0
(5 out of 5 stars) Filter easy to install
Reviewed By: BobPool from St Louis MO ()
Pros: Easy to install
Cons: None
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Steve T. from San Tan Valley, AZ ()
Exact replacement
Was this review helpful to you?
1 0
(4 out of 5 stars) 48 sq ft partial grid 24"
Reviewed By: Ronald B. from park ridge, NJ ()
Pros: quality
installed with larger grids no real problems, hopefully holds up as good or better than the originals
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Dennis A. from Newark, Ca ()
Great product for the price. Inyo Pools saved me money.
Was this review helpful to you?
4 0
(5 out of 5 stars) DE Grids
Reviewed By: Julie from Baltimore, Md. ()
Pros: Perfect fit, well made
Cons: none
these area very well made, fit perfect, easy to install. Quick delivery.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Julie from Halethorpe, MD ()
Pros: perfect fit, well made
Cons: None
These fit perfectly and were well made. I will definately buy from here again.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Julie from Halethorpe, MD. ()
Pros: perfect fit, well made
These grids fit perfectly and arrived quickly. They are very well made and are better then the originals.
Was this review helpful to you?
15 1
(5 out of 5 stars) De Grids
Reviewed By: vivogram from Bridgeview, Il ()
Pros: exactly what we needed
Cons: none
we looked all over for the parts for our filter. We have had it since 1985! the description off the parts as well as the fast shipping was awesome
Was this review helpful to you?