Product Description

The Raypak AVIA Heat Smarter, Play Harder...

Managing your pool heater has never been easier or smarter. AVIA is built with an innovative Wi-Fi-enabled control system that allows you to manage your pool heater and ecosystem through its easy-to-use touch control interface. No need for a separate control panel to manage your pool heater and ecosystem; AVIA does it All. 

• Intelligent Scheduling - AVIA heats and learns the size of your pool and will let you know when your pool is ready at your set temperature.
  Protek Shield™ - cutting-edge module that protects the heat exchanger from corrosion, prolonging the life of the AVIA pool heater.
• Smart Automation - Smart pool control automation system built right into the heater. Enables you to automate and manage your pool temperature.
• Installation Versatility - AVIA can be rotated on all 3 sides, giving you more installation options. It has a right and left water connection, and gas connections can be configured for the right or left side.
• Raymote Mobile App – allows on-the-go control of your pool temperature and so much more.
• Integrated Wi-Fi - Provides a smart connection for real-time service alerts & control from anywhere.
• Smart Ecosystem Manager - Enables you to manage your heater, pumps, water features, and scheduling. 
• Efficiency - AVIA has an 84% efficiency rating and is Low NOx certified.

Elevation: 0 Ft. –  4,500 Ft. Click Here for High Altitude Pool Heaters

California Customers Please Note:  South Coast Air Quality Management District (SCAQMD) Area of Jurisdiction REQUIRES a Low Nox Heater be installed. The following 6 California Counties are affected:  Los Angeles, San Bernardino, Ventura, Orange, Riverside, & Kern. Installing a non-compliant heater in these counties will void the manufacturer's warranty and could result in a fine from your local code enforcement.    

Click here for RayPak RP2100-series Low Nox Heaters

Dimensions:

Warranty:

WARRANTY EXCLUSIONS 
This Limited Warranty does NOT apply; 
1. if the product has been moved from its original place of installation, or if the original 
owner no longer owns the property where the original installation was made; 
2. if the product is not properly installed with a pool or spa by a qualified licensed installer in 
accordance with applicable local codes and ordinances, good trade practices, and the 
manufacturer's installation instructions; 
3. if the rating plate(s) or serial number(s) are altered or removed; 
4. if the product is modified in any way, or non-factory authorized accessories or other 
components are used in conjunction with the product; 
5. to damage, malfunctions or failures resulting from failure to properly install, operate or 
maintain the product in accordance with the manufacturer's instructions; 
6. to damage, malfunctions or failures from abuse, act of nature, accident, fire, flood, freeze, 
lightning or the like; 
7. to damage, malfunctions or failures resulting from [or due to] connected system control 
devices; 
8. performance problems caused by improper sizing of the heater or electric service 
voltage, wiring or fusing; 
9. use of any attachment, including any energy saving device not authorized by the 
manufacturer. 
10. to damage, malfunctions or failures from misuse or neglect, including but not limited to, 
freeze-ups, operating the heater with the cabinet door off, having flow restrictions or 
obstructions between the heater outlet and the pool/spa, or not maintaining a proper 
chemical balance (PH level must be between 7.4 and 7.8 and total alkalinity between 100 
and 150 PPM. Total dissolved solids (TDS) must be no greater than 3000 PPM)

Review Summary