Model # 009193
Warranty 1 Year
Manufacturer Code P-R266A-MN-C #50
PLEASE NOTE: THIS IS A STOCK PHOTO. THE MILLIVOLT HEATER DOES NOT HAVE A DIGITAL DISPLAY/READOUT.
BENEFITS:
Dial control for temperature selection and heater settings
Capron resin headers prevent rust stains from harming pool surface
Plumb directly from provided 2" PVC threaded union
Smart microprocessor controls diagnostic read-out and continuously monitors operating status
Completely field serviceable
Small footprint
High efficiency
Guaranteed high wind reliability
Looks smart and works smart
1 Year Warranty
Thermal Efficiency of 83%
California Customers Please Note: South Coast Air Quality Management District ( SCAQMD) Area of Jurisdiction REQUIRES a Low Nox Heater be installed. The following 6 California Counties are affected: Los Angeles, San Bernardino, Ventura, Orange, Riverside, & Kern. Installing a non-compliant heater in these counties will void the manufacturer's warranty and could result in a fine from your local code enforcement.
Click here for RayPak Low Nox Heaters
Elevation: 0 Ft. – 2000 Ft. Click Here for High Altitude Pool Heaters
Dimensions:
Will a gas heater operate at the low speed of a dual speed motor?
Reply
Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
Reply
What is the difference between an Electronic and Millivolt ignition?
Reply
The basic answer is that Millivolt is the old style of ignition, using a standing pilot light. While the electronic ignition uses a spark start system like a gas grill. Electronic ignitions are more efficient in gas usage and also are better suited for high wind areas where a pilot light might get extinguished.
Reply
Is the Raypak PR226AMN a cupro-nickel heater?
Reply
The Raypak 009193 (PR266AMN) is not a cupro-nickel heater. The cupro-nickel is only available in the digital model which is a Raypak 010103 (PR2266AENX): http://www.inyopools.com/Products/04000013058201.htm
Reply
Is there a conversion kit to convert this heater from natural gas to propane?
Reply
2 to 4 hrs
Adjustable Wrench, Reciprocating saw, tape measure, pencil, sand paper
1 0
Due to covid19 hard to get a pro to install. So I did it myself. This replaced my old versa gold 156, so the gas line simple had to be attached and tested.
The pvc was a little time consuming because I decided to add three cut off valves. I did this thru experience with the old versa. Chemicals, ph, alkalinity are the main reasons for damage to the heater. My thinking is that I’ll only use the heater possible four months out of the year so why run all the chemicals thru the heater when I don,t have to.
Hooked everything, it started right up, and is heating the pool as I write this. My wife likes a very warm pool at least 88 degrees. In Texas during the summer we put frozen jugs of water in to cool it. But in April the water is about 68 degrees. This heater is great.
2 to 4 hrs
Screwdriver, Pliers, Adjustable Wrench
1 1
Replaced the heater with the same brand and type. It was easy to remove the old and install the new. A plumber checked the connections and we are ready for the end of the season and the next season opener in 2019.
The hardest part was twisting the old black pipe off and then I had it replaced with new pipe to the new heater.
The Most Helpful Review
11 0
(5 out of 5 stars) Warms the water quickly
Reviewed By: Fred64 from sterling heights, MI ()
Pros: Old Ray Pak lasted over 16 years (many hard winters)
Cons: none
Nicer than my 16 year old RayPak that needed to be replaced. This one has no rust headers and fewer items than need attention when winterizing. INYO had the best price for my pool heater. Delivery was quick without hassles. This milivolt model works great with no electrical lines required.
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) Awesome heater
Reviewed By: Inyo Customer ()
This heater saves me a ton on my gas bill. Increases my water temperature at least one degree an hour. Easy to hook up too.
Was this review helpful to you?
1 0
(5 out of 5 stars) I love it!!!!
Reviewed By: Inyo Customer ()
This replaced my old versa gold 156. It would take the versa 30 hours to increase the pool temperature by 20 degrees, this beautiful heater took only 8 hours on high. I love it!!!!
Was this review helpful to you?
4 0
(5 out of 5 stars) dependable heater
Reviewed By: Robert U. from elma ny ()
simple to use . dependable
Was this review helpful to you?
3 0
(5 out of 5 stars) Pool Heater
Reviewed By: Douglas C J. from Inverness, Il ()
Pros: Easy to Install
Cons: missing two temperature switch nuts
Was this review helpful to you?