Part # 79206600
All Pentair Pool Products plastic concrete niches are molded of high strength, corrosion resistant PVC with a one inch PVC hub. Both 45 degree and 3/4 in. reducer bushings are included. Gunite models feature rebar tie-backs and a plaster ring for clean, simple installations. All are packed with a gunite/plaster shield.
Additional features include:
Dimensions
Click here for more Pool Light Niche
At what deep it should be installed
Reply
Hi Jorge, You can review the Pentair Small Plastic Niche Installation Manual for installation instructions and requirements.
Reply
What models of lights can be used for this niche?
Reply
Hi Alfonso, You can use the Pentair AquaLight or the PureLine PureColors Spa Light in this light niche.
Reply
What light model do you recommend to install in this small niche? Thanks
Reply
Hi, Alfonso. You can use the Pentair SpaBrite, AquaLight, and Intellibrite light fixtures are compatible with this niche.
Reply
Can this niche be installed in an existing concrete pool as a replacement for a broken niche? In what manner must the existing concrete shell be cut back to permit installation of this niche?
Reply
Hello Ray,We would suggest that you contact a certified pool contractor to review the replacement.
Reply
Less than 1 hr
Screwdriver, Nut Drivers, Pliers
1 0
Install a stringfish tape in 3/4 conduit 145ft attach the cord to end of string lightly pull to panel. 120V AWG#12 black, Awg #12white. Black wire connects to bronze screw, silver screw test with multimedia test 120v watertight tighten screen turn on 20 amp circuit breaker
1 to 2 hrs
Pliers, Bailing Wire
1 0
I stumbled upon Inyo by chance, but glad that I did. After purchasing several hundred dollars in incorrect parts, I called Inyo and was lead to what exactly I needed to purchase. I started building a hot tub without knowing anything about them, so it has been a rough go. Between learning about concrete, form work, electrical and ordering parts, the process has been a total learning experience. Inyo was awesome at answering my questions, but their wait time before talking to someone is horrendous.
