Part # PS3000
Power surges are the silent killer for today’s sophisticated pool and spa equipment. Most homeowners do not realize that today’s pool equipment like variable speed pumps, heat pumps and new electronic controls can be easily wiped out with power surges. The easy-to-install Intermatic surge protectors are the perfect add-on for your pool equipment. They feature unmatched surge protection ratings and a 3-year, $7,500 connected equipment warranty. The Intermatic surge protectors are inexpensive insurance that can save your pool equipment from expensive replacement and save your pool from significant downtime. An estimated $250-$500 million dollars a year is lost from property damages caused by power surges. Your new pool pad equipment can cost over $3000 to replace. Invest in Peace of Mind for your Pool Equipment
Does this product install (two black wire) directly to existing circuit breaker(s) or do I need to install a new dedicated breaker(s) for this to install to?
Reply
The surge protector comes with 3 wires (2 black and 1 white). The white serves as the ground and the black would be the power lines. You can install it in an existing box. Here is a guide: http://www.inyopools.com/HowToPage/how-to-install-an-intermatic-surge-protector-device.aspx and video: https://www.youtube.com/watch?v=z1vi2VmYXi0
Reply
Can I install in the same 20amp breaker that I use for the pool pump?
Reply
Hi, Breaker. Yes, you can. This item can be installed on an electrical sub-panel (load center) or on an individual piece of equipment. When installed on an electrical sub-panel or load center, the PS3000 protects all equipment connected to that panel. Please refer to the PS3000 Intermatic PS3000 Instruction Sheet.
Reply
Do you install the two black wires -1 with red and 1 with blue into the same 20 amp 2 pole breaker - as there is only 1 screw for each pole. OR do you need to do another separate breaker?
Reply
Hi, Steve. You will need (1) Surge Protector per breaker. Use the Intermatic PS3000 Instruction Sheet for the wiring diagram.
Reply
I read this has a $7500 connected equipment warranty. Does this apply to the variable speed pump motor ecm16?
So if the electronics die within 3 years it would be covered?
Reply
Hi, Evan. The warranty only applies to equipment that the Surge Protector is protecting including variable speed pumps and motors. The failure of the product has to be the cause of the Surge Protector failing from a manufacturer defect, it will not cover installation or user error.
Reply
1 to 2 hrs
Screwdriver
I have a lot of power surges in my neighborhood. I purchased this to prevent damage to my pool equipment. It its a relative easy install if you know about power. Do not attempt if you don't! Power can KILL you if you bump into the wrong thing in that panel!!!
Popped out a 3/4 access hole in my outdoor panel and used the lock nut to secure in place.
I then wired it up to the ground and 2 pole breaker that controls my equipment.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
still going strong
Was this review helpful to you?