Product Description

PE140 – Valve Actuator Control

If you do not have an Intermatic enclosure, you can order the PE140 model which
contains the P4043ME mechanism and the appropriate low voltage hardware for
running your actuator cables.

P4043ME – Valve Actuator Control Mechanism

Have you ever wanted an affordable control that would only automate a set of water
valves from the pool position to the spa position? Or maybe just turn a single water
valve to engage a water feature?

Designed specifically for aftermarket and retro-fit applications, the P4043ME is ideal
for controlling up to three water valve actuators with any latching or momentary
contactor (not provided) capable of providing 120 VAC or 240 VAC. In addition, the
P4043ME can switch the thermostat on most heaters between pool and spa when the
actuators change position.

The P4043ME is ideal for those applications where only simple water valve control
is required and can be triggered by any switching device you may provide (i.e. light
switch, spring wound AUTO/OFF, wireless switch, relay, etc…). Installation is easy!
Simply snap the P4043ME into any existing Intermatic enclosure that contains an
available mechanism support bracket, hook up power to both the P4043ME and the
trigger device, and plug in your 24 VAC water valve actuators behind the top door of
the mechanism.

Specifications:

• 120, 208, 240 VAC input voltage
• Controls up to three valve actuators
• Switches heater thermostat
• Remote control capabilities
• Agency approval: CSA/C-US

Contact Ratings – Each Circuit

• Valve Actuator Supply: 24 VAC, 40 VA

Accessories:  PE24VA Intermatic Valve Actuator