PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Hayward Pool Products


Details

Top

Model # S144T1540S

Warranty 1 Year

Alternate Part #'s HAYS144T1540S

Product Description

Pro Series sand systems are designed and equipped to offer the ideal combination of energy efficiency and outstanding water clarity. A broad selection of filter sizes, pumps, and accessories allows you to choose and merchandise the system(s) that best suit your above-ground pool program.

System Features:

  • Systems are designed for quick assembly and precise alignment of components
  • Pumps and filters are performance-matched to provide maximum flow and energy efficiency
  • Filter bases are molded of rugged ABS for long lasting, all-weather performance
  • 4 position PermaGlass XL™ Vari-Flo™ valve provides maximum flow at low pressure drop.
  • All models are one carton systems and UPS shippable up to the 16" systems

System Components:

  • Power-Flo LX pump
  • 1 1/2" hose packages include: two (2) 1 1/2" x 6' lengths of hose, hose adapters and stainless steel hose clamps
  • Deluxe one piece base pre-drilled to accept timer (SP0012T) and automatic chlorine feeder (CL110ABG)

Product Specifications

Pump Model:
Hayward Power-Flo LX
Flow Rating:
40 GPM
Speed:
Single
Volts:
115 V
Hz:
60 Hz
Cord Type:
Standard
Filter Model:
S144T
Filter Type:
Sand
Sand:
50 lbs.
Tank Diameter:
14 in.
Filtration Area:
1.07 sq. ft.
Valve Location:
Top
Multiport Valve:
SP0714T
Turnover 8 Hrs.:
12000 gal.
Turnover 10 Hrs.:
15000 gal.
Top

?     Asked on 1/27/2012by Guest

When should I change the sand in my filter?
 Reply

A  Answered on 1/27/2012 by InyoPools Product Specialist Patrick P.

You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
 Reply


?     Asked on 3/1/2012by Guest

How often do I have to replace the sand in my filter? What is normal operating pressure?
 Reply

A  Answered on 3/1/2012 by InyoPools Product Specialist Patrick P.

On a "fresh start-up" a filter would operate anywhere between 10-20 psi. As a general rule of thumb you only want to backwash when the pressure increases 8-10 psi. You want to make certain that the pump is being turned off whenever you move the handle on the valve. Once backwashing is complete (3-5 minutes), you can switch to the rinse option to re-settle the sand bed. Sand will typically last 5-7 years. Premature backwashing will wear down the size of the sand which will cause difficulties such as cloudy water and higher operating pressures.
 Reply


?     Asked on 10/7/2014by Guest

What size pump motor comes with this filter?
 Reply

A  Answered on 10/7/2014 by InyoPools Product Specialist Patrick P.

This motor is considered to be a 40 galllon per minute motor. Its not cosidered a rated any horse power yet it's own specified flow rating and fairly common with above ground pool pumps.
 Reply


?     Asked on 3/13/2015by Inyo Visitor

I have a 24 ' above ground x 54" deep pool, I need a new pump/ sand filter combo, what do you recommend that will last, Thanks
 Reply

A  Answered on 6/9/2015 by InyoPools Product Specialist Patrick P.

This filter system would be a little too small for your pool. I would suggest the Hayward filtration system which comes with an 18" Sand Filter & 1 HP Pump.
 Reply


?     Asked on 5/30/2016by bob

i have a 15 ft above ground ground pool, need a filter system used if possible pool is old s
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Alex V.

Bob, I would recommend at least a 16" tank. We have one on clearance here: http://www.inyopools.com/Products/07501352062843.htm
 Reply