Part # CX200XRE
Dimensions 28-1/8" x 10"
Hayward SwimClear C200S OEM Cartridge
LOOK: Pureline Cartridge for Hayward C200S - PL0167 SAVE!!!!
Can you tell me the dimension and length of this filter? It is not stated.
Reply
Hi Tina, The Hayward SwimClear C200S OEM Cartridge dimensions are: Outside Diameter: 10.39", Inside Diameter: 3.98", Height: 28.29"
Reply
I Order a Hayward SwimClear C200S Single Element Filter a few years back and I'm Looking to replace the filter. The Harward Filter is Marked CS200E. Is this the correct filter to reorder?
Reply
Hi Gregg, Yes this is the correct replacement cartridge for your Hayward C200S Cartridge filter, this is what you need.
Reply
Less than 1 hr
None
I tried to replace the Hayward OEM Cartridge with another brand from a popular pool supply store. It did not fit the Hayward filter correctly and did not slide down over the center element which did not let the cover close completely.
I bought a Hayward cartridge from INYOPools and it fit. The Hayward unit closes correctly and does a great job of filtering the water.
2 to 4 hrs
None
1 0
1) Called warranty tech for system
2) Tech checked entire heating system. Checked jets found out the pressure was not right.
3) Initial system check said there were not enough jets in the total system so the pressure would shut off the heater.
4) After lowering the filter speed the heater began working.
5) The heater worked for an hour or so then cut off again.
6) I called the tech and he said the only thing he hadn't done was try to run the system without the filter in.
7) I removed the filter and ran the system for a day and the heater began to work without shutting down.
8) I ordered a replacement filter from Inyo Pools and the system is now working fine. The original filter that came with the NEW pool I bought was faulty.
