Part # GLXPC12KIT
Goldline / AquaLogic Temperature Sensor Kit w/ 15ft Leads - GLXPC12KIT
I have two sensors, one for the air temperature and one for water temperature. This part looks like my air sensor, but I need the water sensor replaced. Is this the correct one for water? Thanks!
Reply
Hi, The Goldline / AquaLogic Temperature Sensor Kit w/ 15ft Leads (GLXPC12KIT) would be the correct temperature sensor for the water.
Reply
I have a Haywood System with a Pro Logic Controller and it shows a 'water temperature sensor short'. Do I assume that is what needs to be replaced, or do I do some troubleshooting? And, if bad, what is the part # and price?
Reply
Hi, Ken. You can troubleshoot the sensor by measuring the resistance. You can use the chart on page 44 of the ProLogic Troubleshooting Guide. If the sensor is fine, then the terminal is the issue.
Reply
I see another question in your Q and A section asking if his is the right sensor for the air, are the two sensors different, I have been led to believe that the two sensors are interchangeable and this sensor could be used either for the air or water sensing side of the unit ?
Reply
Hi, Tom. This Temperature Sensor Kit is used for water and air.
Reply
I have the E-Command 4 controller which is not keeping time so i am looking to replace it, However I noticed that the sensor for the water temp says there is a short is this the right item to replace it? Or should I look at something else?
Reply
yes the GLXPC12KIT is the correct sensor (59-150-1008 )
Reply
The Most Helpful Review
3 0
(1 out of 5 stars) Poor quality part
Reviewed By: John T. from Canton, GA ()
Cons: poor product design
This part needs to be redesigned. I need to replace it every year for one reason or another. I have had my pool for five years and had to replace this part five times. The connection from the wire to thermometer is so delicate that it breaks and without it, the filer's freeze warning nver shuts off. This was a very poor design
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) replacement temperature sensor
Reviewed By: Lynn S. from Chesapeake VA ()
This product was a direct replacement, arrived very quickly, was super easy to install and posed absolutely no issues. ten minutes after it arrived it was doing its job.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Rick from Waddell, AZ ()
Got it right on plugged right and worked just right.
Was this review helpful to you?
1 0
(5 out of 5 stars) Replaced a temperature sensor on another brand
Reviewed By: Marc G. from Henderson, TX ()
Pros: Great Fit
Cons: none
Replaced the sensor on another brand but the same part. Worked perfectly and records the right temperature. Used the web site to find the part and very pleased.
Was this review helpful to you?
1 0
(5 out of 5 stars) Excellent Replacement device
Reviewed By: Mark S. from Missouri City, TX ()
This is the second year I have used INYO Pools for equipment and replacement parts. Excellent service and perfect fit.
Was this review helpful to you?